EXCERPT FROM 1.2 DETAILED SERIES INFORMATION PROLINK ENGINEERING MANUAL 01/24 (Ref-No. 888) siegling prolink modular belts SERIES 10 Straight running belts Pitch 25.4 mm (1 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com, [email protected] Siegling Prolink Engineering Manual · 01/2024

siegling prolink modular belts Straight running belts | Pitch 25.4 mm (1 in) Belts for light to medium-duty hygiene-critical applications Side view scale 1:1 Available surface pattern and opening area S10-0 FLT Closed, smooth surface Design characteristics – Small number of eyelets ensures easy cleaning S10-0 NTP Closed surface with round studs – Hinges that open wide, combined with smooth, flat channels on the underside and a continuous drive bar produce an easy-to-clean design S10-0 FRT1 Closed surface with friction top – Robust design guarantees superior durability – Optimal design of sprocket...

siegling prolink modular belts SERIES 10 | BELT TYPES Straight running belt | Pitch 25.4 mm (1 in) Closed, smooth surface | Flat top surface Belt dimensions Available standard materials 3> Belt Mold to order belts Mold to width available in: 76 mm (3.0 in), 152 mm (6.0 in), 229 mm (9.0 in) * Values valid for dry applications (RH <50 %o). Belts in PA material will absorb water in wet environments, causing them to expand and reduce the nominal belt pull capacity. ■ BL (Blue), LB (Light blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please...

siegling prolink modular belts SERIES 10 | BELT TYPES Straight running belt | Pitch 25.4 mm (1 in) Closed surface with round studs 9 % contact area | Version available without round studs at the side (38 mm indent) Variant specific dimensions [mm (in)] Belt dimensions Available standard materials 3> PE WT PE WT 6 411 5.5 Mold to width available in: 229 mm (9.0 in) ■ BL (Blue), ■ LB (Light blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 ‘Temperature influence". All imperial dimensions (inches) are...

siegling prolink modular belts SERIES 10 | BELT TYPES Straight running belt | Pitch 25.4 mm (1 in) Closed surface with flat integrated friction pads (FRT1) for high grip | 67 % contact area | Version available without FRT1 structure at the side (38 mm indent) A Variant specific dimensions [mm (in)] Belt dimensions Available standard materials 3> Belt Mold to width available in: 229 mm (9.0 in) ■ BG (Beige), ■ BL (Blue), nBK (Black), LB (Light blue), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 ‘Temperature influence"....

siegling prolink modular belts SERIES 10 | BELT TYPES Straight running belt | Pitch 25.4 mm (1 in) Open area (22 %) for excellent air circulation and drainage | Smooth surface | 70 % contact area (Largest opening: 2.6 x 5.3 mm/0.10 x 0.21 in) Variant specific dimensions [mm (in)] Belt dimensions Available standard materials 3> Belt Mold to order belts PE-MD BL POM-MD BL 3 206 5.1 1.04 0.0 -70/65 -94/149 • • Mold to width available in: 76 mm (3.0 in), 229 mm (9.0 in) ■ BL (Blue), ■ LB (Light blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations...

siegling prolink modular belts SERIES 10 | BELT TYPES Straight running belt | Pitch 25.4 mm (1 in) Open area (36 %) for excellent air circulation and drainage | Lateral ribbing 12 % contact area (Largest opening: 5.8 x 13.4 mm/ 0.23 x 0.53 in) | open area lateral rib version for small inclines and gentle conveying of delicate products Variant specific dimensions [mm (in)] Belt dimensions Available standard materials 3> Belt Mold to width available in: 229 mm (9.0 in) ■ LB (Light blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please...

siegling prolink modular belts SERIES 10 | BELT TYPES Straight running belt | Pitch 25.4 mm (1 in) Open area (36 %) for excellent air circulation and drainage | Smooth surface | 44 % contact area (Largest opening: 5.8 x 13.4 mm/0.23 x 0.53 in) Belt dimensions Available standard materials 3> Belt Mold to order belts * Values valid for dry applications (RH <50 %>). Belts in PA material will absorb water in wet environments, causing them to expand and reduce the nominal belt pull capacity. Attention! Due to the very large surface openings, personnel must be instructed not to place their fingers...

siegling prolink modular belts SERIES 10 | SPROCKETS Straight running belt | Pitch 25.4 mm (1 in) Optimal design of sprocket teeth and tracking fins provides superior sprocket engagement, safe belt tracking and an easy-to-clean sprocket Main dimensions Shaft bores (• = Round, ■ = Square) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 ‘Temperature influence". All imperial dimensions (inches) are rounded off. For detailed sprocket and shaft dimensions see appendix 6.3 Number of sprockets (sprocket spacing distance) see chapter 3.2...

siegling prolink modular belts Straight running belt | Pitch 25.4 mm (1 in) S10-0 FLT PMU/S10-0 FLT PMU I38 Flat top surface for dry products Basic data Height (h) Material ● = no indent, ▲ = with indent 38 mm Standard configuration S10-0 FLT PMU LB (Light blue), All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 “Temperature influence“. All imperial dimensions (inches) are rounded off. Note: Use of accessory in a belt may impact on the minimum design radii. Please see chapter 6.3 for further information.

siegling prolink modular belts Straight running belt | Pitch 25.4 mm (1 in) S10-0 NCL PMU/S10-0 NCL PMU I38 No cling surface to improve release of wet and sticky products Basic data Height (h) Material ● = no indent, ▲ = with indent 38 mm Molded width: 152 mm (6.0 in) 38 (1.5) (min. indent) 19 (0.75) (increment) Standard configuration S10-0 NCL PMU BL (Blue), All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 “Temperature influence“. All imperial dimensions (inches) are rounded off. Note: Use of accessory in a belt may impact on the...