EXCERPT FROM PROLINK ENGINEERING MANUAL 12/17 (Ref-No. 888) siegling prolink modular belts SERIES 1 Straight running belts Pitch 50 mm (1.97 in) Prolink Engineering Manual · 12/2017

siegling prolink modular belts Straight running belts l Pitch 50 mm (1.97 in) Belts for medium to heavy-duty industrial conveying applications Side view scale 1:1 Available surface pattern and opening area S1-0 FLT Closed, smooth surface 50 (1.97) S1-18 FLT Open (18 %), smooth surface Design characteristics S1-0 NSK Closed surface and non-skid pattern – Narrow, closed hinge design provides high belt pull capacity – Rigid module design makes belt suitable for long conveyors S1-0 FRT1 Closed surface with friction top – Closed solid edge design Basic data Pitch 50 mm (1.97 in) 250 mm (9.8 in) for...

Straight running belt | Pitch 50 mm (1.97 in) Closed, smooth surface | Flat top surface Belt dimensions dpin Made to order belts AT (Anthracite), ■ BK (Black), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with FDA 21 CFR 31 Complies with (EU) 10/2011 and (EC) 1935/2004...

Straight running belt | Pitch 50 mm (1.97 in) Open version (18 %) for excellent air circulation and drainage | Flat top surface | Smooth surface Variant specific dimensions [mm (in)] Belt dimensions dpin UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. 11 Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with FDA 21...

Straight running belt | Pitch 50 mm (1.97 in) Closed surface | Non-skid surface for increased safety when walking on belt Variant specific dimensions [mm (in)] Belt dimensions dpin AT (Anthracite), UC (Uncolored), YL (Yellow) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. 11 Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with FDA 21 CFR 31...

Straight running belt | Pitch 50 mm (1.97 in) Closed surface | Friction top with replaceable rubber pads for increased grip Belt dimensions dpin Available standard materials41 Belt ■ BK (Black), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. 11 Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with FDA 21 CFR 31 Complies...

Straight running belt | Pitch 50 mm (1.97 in) Main dimensions Sprocket size (Number of teeth) Shaft bores (• = Round, ■ = Square) 25 mm Material: POM, Color: UC UC (Uncolored) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off.

Straight running belt | Pitch 50 mm (1.97 in) S1-0 FLT PMC Flat top surface for dry products | No cling surface to improve release of wet and sticky products Basic data Type AT (Anthracite), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Note: Use of accessory in a belt may impact on the minimum design radii. Please see chapter 6.3 for further information. MOVEMENT SYSTEMS

Straight running belt | Pitch 50 mm (1.97 in) Open verson (18 %) base module) for drainage | No cling surface to improve release of wet and sticky products Basic data Type UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Note: Use of accessory in a belt may impact on the minimum design radii. Please see chapter 6.3 for further information. MOVEMENT SYSTEMS

Straight running belt | Pitch 50 mm (1.97 in) For retention of bulk products Recommended running direction BL (Blue), LB (Light blue), DWT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Note: Use of accessory in a belt may impact on the minimum design radii. Please see chapter 6.3 for further information.

i Series S1 ... S14 a Open area/Sprocket size p- 'I' -lilag- ■ 'I ■■ 'M ii' '■ I Format: xx E.g. 20 = 20 % I oi spun kels: numbei of teeth I oimal: "/"xx E.g. /12 = 12 teeth s Height/Diameter/ Bore size and style Height in mm Format: Hxxx pin diam-l-i in mm I o'l mat Dxxx Bore size: SQ (= square) or RD (= round) either in mm ■ t in he -• Format: SQxxMM or RDxxIN 1 Length/Width Pins Length in mm I or map I /// M/'dul- e width in mm I mmaP W/// * For each series' standard colors please refer to the table of materials for each belt (chapter 1.2). A number of other colors are available on request....