excerpt from 1.2 DETAiLED SEriES iNFOrMATiON PRolink Engineering Manual 02/18 (Ref-No. 888) siegling prolink modular belts SERIES 6.1 Straight running belts Pitch 50 mm (1.97 in) Prolink Engineering Manual · 02/2018

siegling prolink modular belts Straight running belts l Pitch 50 mm (1.97 in) Belts for medium to heavy-duty, hygiene-critical applications Side view scale 1:1 Available surface pattern and opening area S6.1-0 FLT Closed, smooth surface S6.1-0 NTP Closed surface and round studs Design characteristics – Wide modules and eyelets for less soiling S6.1-0 CTP Closed surface and pointed studs – Hinges that open wide, wide channels on the underside and a continuous drive bar for an easy-to-clean design S6.1-21 FLT Open (21 %), smooth surface – robust design and smooth, cut-resistant surface (depending...

Straight running belt | Pitch 50 siegling prolink modular belts S6.1-0 FLT | 0 % Opening | Flat top Closed, smooth surface | Flat top surface | Easy-to-clean Belt dimensions Available standard materials2) Belt Made to order belts BL (Blue), ■ LB (Light blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. ') Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down...

BELT TYPESsiegling prolink modular belts S6.1-0 NTP | 0 % Opening | Nub top (round studs) Closed surface and round studs | 6 % contact area | Nub top surface for good release of wet and sticky products | Easy-to-clean Belt dimensions Made to order belts Also available with molded indent 40 mm (1.57 in). LB (Light blue), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. ') Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load...

siegling prolink modular belts SERIES 61 | BELT TYPES Straight running belt | Pitch 50 mm (1.97 in) Closed surface and pointed studs | Cone top surface pattern for superior grip | Easy-to-clean Belt dimensions Made to order belts UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. ') Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller...

siegling prolink modular belts SERIES 61 | BELT TYPESStraight running belt | Pitch 50 mm (1.97 in) S6.1-21 FLT | 21 % Opening | Flat top Open area (21 %) for excellent air circulation and drainage | 58 % contact area (Largest opening: 1.9 x 11 mm/0.07 x 0.43 in | Smooth surface | Easy-to-clean Belt dimensions LB (Light blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. ') Flex radii: r1 = side flex, r2 = front flex on roller,...

siegling prolink modular belts SERIES 61 | BELT TYPES Straight running belt | Pitch 50 mm (1.97 in) Open area (23 %) for excellent air circulation and drainage | 61 % contact area (Largest opening: 4.3 x 9.3 mm/0.17 x 0.37 in) Smooth surface | Easy-to-clean Belt dimensions PE-MD POM-CR Made to order belts BL (Blue), ■ LB (Light blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. ') Flex radii: r1 = side flex, r2 = front flex...

siegling prolink modular belts SERIES 61 | BELT TYPESStraight running belt | Pitch 50 mm (1.97 in) S6.1-36 FLT | 36 % Opening | Flat top Open area (36 %) for excellent air circulation and drainage | 20 % contact area (Largest opening: 11.8 x 15.2 mm/0.46 x 0.6 in) Smooth surface | Easy-to-clean Belt dimensions Attention! Due to the very large surface openings, personnel must be instructed not to place their fingers in or on this belt. BL (Blue), ■ LB (Light blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter...

siegling prolink modular belts SERIES 61 | SPROCKETS Straight running belt | Pitch 50 mm (1.97 in) Special easy-to-clean sprocket with enhanced tooth engagement for excellent force transmission B -B Main dimensions Sprocket size (Number of teeth) Shaft bores (• = round, ■ = Square) 30 mm Material: PA, Color: LG LG (Light gray) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off.

siegling prolink modular belts Straight running belt | Pitch 50 mm (1.97 in) Flat top surface for dry products Basic data Type • = no indent, ▲ = with indent 40 mm BL (Blue), ■ LB (Light blue), □ WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Note: Use of accessory in a belt may impact on the minimum design radii. Please see chapter 6.3 for further information.

siegling prolink modular belts Straight running belt | Pitch 50 mm (1.97 in) No cling surface with nub top base to improve release of wet and sticky products Basic dataType Material S6.1-0 NCL PMU LB (Light blue), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Note: Use of accessory in a belt may impact on the minimum design radii. Please see chapter 6.3 for further information. MOVEMENT SYSTEMS