Serie 13
6Pages

Catalog excerpts

EXCERPT FROM PROLINK ENGINEERING MANUAL 12/17 (Ref-No. 888) siegling prolink modular belts SERIES 13 Straight running belts Pitch 8 mm (0.31 in) Prolink Engineering Manual · 12/2017

Open the catalog to page 1

siegling prolink modular belts Straight running belts l Pitch 8 mm (0.31 in) Belts for light to medium-duty food and non-food nose bar applications Side view scale 1:1 Available surface pattern and opening area S13-0 FLT Closed, smooth surface Design characteristics – Micro pitch belt with small transfer gaps – Designed to run over nosebars/knife edges or rollers with a radius down to 3 mm (0.12 in) allowing, precise transfer of even the smallest products S13-0 NPY Closed surface with inverted pyramid pattern – Versatile for conveying, drying and cooling applications – Optimal design of...

Open the catalog to page 2

Straight running belts l Pitch 8 mm (0.31 in) Closed, smooth surface | Flat top surface Belt dimensions mm inch Made to order belts ■ BK (Black), ■ BL (Blue), LG (Light gray), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with FDA 21 CFR 31 Complies with (EU)...

Open the catalog to page 3

S13-0 NPY | 0 % Opening | Inverted pyramid Closed surface with inverted pyramid pattern | Provides superb release characteristics when conveying wet or sticky products Belt dimensions mm inch BL (Blue), UC (Uncolored) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. 11 Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with FDA 21 CFR 31...

Open the catalog to page 4

Straight running belts l Pitch 8 mm (0.31 in) Main dimensions Sprocket size (Number of teeth) Shaft bores (• = Round, ■ = Square) Material: PA, Color: LG LG (Light gray) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. MOVEMENT SYSTEMS

Open the catalog to page 5

i Series S1 ... S14 a Open area/Sprocket size p- 'I' -lilag- ■ 'I ■■ 'M ii' '■ I Format: xx E.g. 20 = 20 % I oi spun kels: numbei of teeth I oimal: "/"xx E.g. /12 = 12 teeth s Height/Diameter/ Bore size and style Height in mm Format: Hxxx pin diam-l-i in mm I o'l mat Dxxx Bore size: SQ (= square) or RD (= round) either in mm ■ t in he -• Format: SQxxMM or RDxxIN 1 Length/Width Pins Length in mm I or map I /// M/'dul- e width in mm I mmaP W/// * For each series' standard colors please refer to the table of materials for each belt (chapter 1.2). A number of other colors are available on...

Open the catalog to page 6

Serie 13 6Pages

Catalog excerpts

All Forbo Siegling GmbH catalogs and technical brochures

Serie 13
6Pages