nolisnart gnilgeis conveyor and processing belts ATAD TEEHS Product Data Sheet Applications Bakery industry Dough conveying Candy industry Cooling tunnel belt Food industry Feeder belt / transfer belt; Packaging machines for unpacked food General material handling Needle machines Application Group Mini conveyor (see remarks) Order information Article number Suitable for corrugated side walls Standard delivery width Maximal delivery width (without longitudinal seam) on request Longitudinal seam possible snoitulos gnitleb latot - gnilgeiS

nolisnart gnilgeis conveyor and processing belts E 3/1 U0/U2 HACCP white FDA Construction Article number Surface pattern Coating thickness Driving face material Polyurethane impregnation Surface pattern Tension member material Laterally stiff fabric of polyester warp and weft Number of fabric plies Driving face weave Plain weave Technical data Total thickness k1% value relaxed (effective pull at 1% elongation), established in line with ISO 21181:2005 Recommended Elongation at fitting min. 0.3 % Recommended Elongation at fitting max. 1 % Friction coefficient of driving face against 0.18 steel...

nolisnart gnilgeis conveyor and processing belts E 3/1 U0/U2 HACCP white FDA Properties Lateral stiffness Laterally stiff Inclined conveying Suitable for knife edges Noise development Belt support Slider bed (support rollers possible) Suitable for the transport of unpacked Food in compliance with food safety regulation (EU) 10/2011 and regulation (EC) 1935/2004 Suitable for the transport of unpacked Food in compliance with FDA regulation 21CFR Compliant to the regulation MHLW 370 (Ministry of Health and Welfare Notification No. 70 Version 2020) for the transport of unpackaged foodstuffs. Certificated...

nolisnart gnilgeis conveyor and processing belts ATAD TEEHS E 3/1 U0/U2 HACCP white FDA Fabrication Belt edge sealing Smartseal; Proseal Suitable for corrugated side walls Mechanical fasteners Minimum drum diameter Z-splice, counter-bending Z-splice, bending Z-splice, minimum radius fixed knife edge 3 mm / 0.1 in Remarks ► In case of using the material for a mini-conveyor application, give enough tension to prevent slippage under maximum load. Chemical resistance The physical data in this data sheet is approximate, can alter depending on production environments and was established at standard...