ENDURA® 1000LINEAR
8Pages

FOOKE Travelling Column Milling Machine

Fixed machine bed (X-axis) Movable column (Y-axis) Lifting beam (Z-axis) 2-axis fork-type milling head with highperformance milling spindle Latest CNC control units Machine table Machine enclosure with windows Equipment Modular and extremely rigid machine with an intelligent hybrid design (steel, welded, cast iron and mineral casting components) Resistant, highly powerful linear motors in the linear axes (Y and Z) Direct measuring systems in all axes (X, Y, Z, A and C) Safety system and brakes in all linear axes (X, Y and Z) Linear guiding devices and drive motors are efficiently protected...

Traverse paths X-axis: 8,000 - 60,000 mm Y-axis: 2,000 - 5,000 mm Z-axis: 800 - 2,000 mm –––––––––––––––––––––––––––––––––––––––––––––––––––– Feed rates X-axis: 5 - 55,000 mm/min Y-axis: 5 - 55,000 mm/min Z-axis: 5 - 55,000 mm/min –––––––––––––––––––––––––––––––––––––––––––––––––––– Acceleration max. 5 m/sec2 –––––––––––––––––––––––––––––––––––––––––––––––––––– Repeatability X-axis: 0.015 mm Y-axis: 0.015 mm Z-axis: 0.015 mm –––––––––––––––––––––––––––––––––––––––––––––––––––– Position accuracy X-axis: 0.025 mm Y-axis: 0.025 mm Z-axis: 0.020 mm

To further increase the dynamic of the machine, all moving components were optimised with regard to weight, rigidity and absorbability. This is only possible with expert knowledge and the aid of FEM and modal analysis. Benefit from the capabilities of the modular design of the ENDURA® 1000LINEAR series. The unique combination of the X-axes from 8 – 60 m, Y-axes from 2 – 5 m and Z-axes from 0.8 – 2 m means that there is an almost unlimited application range, which can be extended with a wide variety of options. By integrating linear motors into a rigid Y-/Z-axis-combination and due to an...

1005LINEAR Roughing Synthetic material Ureol Aluminium Cast iron Steel Synthetic material Ureol Aluminium Cast iron Steel 1008LINEAR With torque motor drives in A- and C-axis Option: automatic spindle changer Roughing Synthetic material Ureol Aluminium Cast iron Steel

High-frequency milling spindle HSK63A with 25 kW, 20,000 rpm Milling spindles with different performance characteristics are possible! A-axis (spindle swivelling axis) C-axis (milling head rotary axis Pivoting angle: High-frequency milling spindle 1 Tool holding fixture: HSK63 A High-frequency milling spindle 2 Tool holding fixture: High-frequency milling spindle 3 Tool holding fixture: High-frequency milling spindle HSK100A with 63 kW, 15,000 rpm- Milling spindles with different performance characteristics are possible! A-axis (spindle swivelling axis) C-axis (milling head rotary axis)...

Discover the Whole World of Precision. Our brochures: Plate Milling Machine ENDURA® 800 Travelling Column Milling Machine ENDURA® 1000LINEAR Compact Gantry Milling Machine ENDURA® 700LINEAR Gantry Milling Machine ENDURA® 900LINEAR Lateral Milling Machine ENDURA® 1100LINEAR FOOKE GmbH · Raiffeisenstraße 18-22 · D-46325 Borken Fon: +49 (0)2861 8009-01 · Fax: +49 (0)2861 8009-800 · info@fooke.de · www.fooke.de Gantry Milling Machine ENDURA® 600LINEAR