*mydirectindustry

Catalogs
FONTECK INDUSTRIES
CFBD – CENTRIFUGAL FAN

CFBD – CENTRIFUGAL FAN

Product catalog summary

Overview: The CFDB centrifugal fan by Fonteck Industries is designed for hazardous environments, certified for ATEX and IECEx standards, suitable for Zone 1 and 2 gas environments, and Zone 21 and 22 dust environments. It is applicable in industries such as Oil & Gas, Offshore Platforms, Chemical, Petrochemical, Refinery, and Marine.

Features: Available in 30 sizes with housing diameters from 315mm to 600mm, constructed with stainless or carbon steel housing, and impellers made from stainless steel, aluminum, or SMC/GRP. Driven by an ATEX certified motor.

Specifications: Complies with EN 14986 and EN 13463-1 standards, certified by DNV and LCIE (LCIE 16 ATEX 1015X). Categorized under Group II, Category 2G or 2D, with gas group IIB+H2 and dust group IIIB or IIIC. Operates within temperature class T5 to T1 and ambient temperature range of -40°C to +60°C.

Mechanical and Electrical Specifications: Supports a maximum rated voltage of 690VAC, operates at 50 or 60Hz. Motor frame sizes range from 80 to 280, with motor poles of 2, 4, or 6. Maximum motor rated power is 15kW at 50Hz or 18.5kW at 60Hz.

Installation and Material Details: Housing made from stainless or carbon steel, with natural finish for stainless steel and powder coating for carbon steel. Impeller available in stainless steel, aluminum, or SMC/GRP, with natural metallic or specified colors for powder-coated materials.

Performance Data: Detailed performance data for models at 50Hz and 60Hz, including air volume, total pressure, static pressure, motor frame size and pole, power, speed, and noise levels. Example: CFDB-155 model at 50Hz has an air volume of 300 m3/h, total pressure of 570 Pa, and noise level of 66 dB(A).

Dimension Chart: Provides dimensions for various models, detailing housing opening diameter, length, width, height, thickness, motor shaft diameter, and clearance between impeller blades and housing.

Document Overview: Technical specifications and ordering information for CFDB series products, specifically models CFDB-540, CFDB-560, CFDB-580, and CFDB-600.

Specifications: Detailed specifications for each model, including power ratings, dimensions, and performance metrics. Example: CFDB-540 model has power ratings from 13000 to 20000, with efficiency and operational parameters.

Ordering Information: Includes an ordering table outlining product type, housing opening diameter, housing material, certification, impeller material, nominal voltage, voltage range, and frequency. Example: Ordering code CFDB-600CS1SS400A indicates a CFDB product with a 600mm housing opening, carbon steel housing, ATEX certification, stainless steel impeller, and nominal voltage of 400VAC.

Notes: Clarifies data interpretation for voltage specifications and ordering codes.

Contact Information: Provides contact details for Fonteck Industries, including phone numbers, fax, email, and website for downloadable product data sheets.

Catalog excerpts

FONTECK INDUSINDUSTRIES BV Glasblazerstraat 12E, 2984 BL Ridderkerk, The Netherlands Tel: +31 (0)180 396550 Fax: +31 (0)180 396551 E-mail: [email protected] CFBD - CENTRIFUGAL FAN (Explosion Proof) Features: > ATEX Certified > Comply with standards: > EN 14986, EN 13463-1 > Driven directly by IECEx or ATEX certified motor > 30 sizes with housing opening diameter from 315mm to 600mm > Stainless steel or carbon steel housing material > Stainless steel or aluminum or SMC/GRP impeller material Type CFDB centrifugal fan is designed according to EN 14986, EN 13463-1 standards. The product is certified for installation in Zone 1 and Zone 2 for gas environment, Zone 21 and Zone 22 for dust environment. It specially applies to Oil & Gas, Offshore Platform, Chemical, Petrochemical, Refinery and Marine Industries etc. Type CFDB centrifugal fan has stainless steel or carbon steel material housing fitted with stainless steel, aluminum or sheet molding compound (SMC) which is also called glass-fiber reinforced polyester (GRP) material impeller. The impeller is backward or forward. The fan is driven directly by an ATEX certified motor. Type CFDB centrifugal fan is typically used for general HVAC (exhausting, filtration, air return and supply etc.) and industrial applications where large volumes of clean air are required at low to moderate pressure. DOC NO.: CFDB-DS-16-001 REV: 16-001Date: 09/2016 Downloadable product data sheets as well as further information about our products are available at our website: www.fonteck.com or Connect our Sales Office.

Open the catalog to page 1

FONTECK INDUSINDUSTRIES BV Glasblazerstraat 12E, 2984 BL Ridderkerk, The Netherlands Tel: +31 (0)180 396550 Fax: +31 (0)180 396551 E‐mail: [email protected] Mechanical Specification: Case Material: (SMC)/Glass‐fiber Reinforced Polyester (GRP) Natural Finish for Stainless Steel Material Metallic Gray for Powder Coating or Other Colors (Specify) Black for Sheet Molding Compound (SMC)/Glass‐fiber Reinforced Polyester (GRP) Electrical Specification:

Open the catalog to page 2

FONTECK INDUSINDUSTRIES BV Glasblazerstraat 12E, 2984 BL Ridderkerk, The Netherlands Tel: +31 (0)180 396550 Fax: +31 (0)180 396551 E-mail: [email protected] DOC NO.: CFDB-DS-16-001 REV: 16-001Date: 09/2016 Downloadable product data sheets as well as further information about our products are available at our website: www.fonteck.com or Connect our Sales Office.

Open the catalog to page 3

FONTECK INDUSINDUSTRIES BV Glasblazerstraat 12E, 2984 BL Ridderkerk, The Netherlands Tel: +31 (0)180 396550 Fax: +31 (0)180 396551 E-mail: [email protected] Downloadable product data sheets as well as further information about our products are available at our website: www.fonteck.com or Connect our Sales Office.

Open the catalog to page 4

Open the catalog to page 5

Open the catalog to page 6

Open the catalog to page 7

FONTECK INDUSINDUSTRIES BV Glasblazerstraat 12E, 2984 BL Ridderkerk, The Netherlands Tel: +31 (0)180 396550 Fax: +31 (0)180 396551 E‐mail: [email protected] CFDB-540 Nominal Voltage & Voltage Rang Impeller Material ATEX Certified Housing Material Housing Opening Diameter Product Type DOC NO.: CFDB‐DS‐16‐001 REV: 16‐001Date: 09/2016 Downloadable product data sheets as well as further information about our products are avai

Open the catalog to page 8

FONTECK INDUSINDUSTRIES BV Glasblazerstraat 12E, 2984 BL Ridderkerk, The Netherlands Tel: +31 (0)180 396550 Fax: +31 (0)180 396551 E-mail: [email protected] Ordering Table: Please refer to the below ordering code table. If you need more information, please contact our sales representative for assistance. Product Type Housing Opening Diameter (mm) SS-Stainless Steel CS-Carbon Steel Housing Material Certifica tion Impeller Material SS-Stainless Steel Nominal Voltage & Voltage Range (VAC) SM-SMC (Sheet Molding Compound) Note 2: The data before the dash represents the nominal voltage....

Open the catalog to page 9

FONTECK INDUSINDUSTRIES BV Glasblazerstraat 12E, 2984 BL Ridderkerk, The Netherlands Tel: +31 (0)180 396550 Fax: +31 (0)180 396551 E‐mail: [email protected] DOC NO.: CFDB‐DS‐16‐001 REV: 16‐001Date: 09/2016 Downloadable product data sheets as well as further information about our products are available at our website: www.fonteck.com

Open the catalog to page 10

CFBD – CENTRIFUGAL FAN

CFBD – CENTRIFUGAL FAN

Catalog excerpts

All FONTECK INDUSTRIES catalogs and technical brochures