Laser welding / cleaning / cutting Small and compact body Weight: <50Kg

High electro-optical conversion rate, energy saving and environmental protection. High output power and superior beam quality. ® High stability, high reliability, long lifetime. ® Full fiber structure, compact structure, maintenance-free, low cost. ® Special refrigeration scheme, air-cooled design, reduce energy consumption, and ensure stable and long term light emission. ® With modular desian, the weicht and dimensions are much smaller than similar products in the current. ® Triple protection design, including air pressure detection device. ® The maximum power is 2000W, the penetration depth...

Machine Part Instruction

Regular Handheld Laser Welding Machine Our Mini Air cooling 3 in 1 laser Welding machine

with wire

Wire feeder Operation panel Fiber Cable lengh: 9m Emergency button Power switch '—Pilot lamp

Copper nozzle Wire feeding bracket

Models Laser Power Voltage Power adjustable range Central wavelength Line length Laser working method Speed range Repeat precision Cooling water Laser Type Working humidity Focal Spot Diameter Welding gap requirements Welding depth Cleaning efficiency Scanning Width (mm) Expected Focal Distancefrrm) Pulse Frequency Applicable Material Laser head Operating Voltage Fiber length Shielding Gas Input Power Focal Length Focal Length(Cleaning) Protective Lens Spot Adjusting Range Indicate system Fiber diameter welding gun cable length Collimation Focus collimation Machine ParameterMachine Specifications...

Machine Details

The laser generated by the lasersource is transported to thewelding head, then is collectedand reflected by a reflector and focused by the focusing lens to reach the nozzle and finally firedto the material. Different shapes of nozzles are suitable for different jobs. Need to replace with grooved nozzles when used with a wire feeder. When switching to cutting mode, a special nozzle for cut-ting is required. The system has adou-ble-layer protective lens to protect the reflector from damage to the greatest extent. At the same time, the temperature control system will stop working once the temperature...

Control switch Simplified switch system,only one power switch, saving the operator’s time. The emergency stop switch protects the operator and quickly stops the equipment from working. Touch screen makes you change the parameter-squickly when wearing-gloves. Multiple sets of parameters can be saved, and there is no need to adjust again for multiple welding in the future after one test. Standard automatic wirefeeding system and dua-motors.The forward an-dreverse and the speed of wire feeding can be adjusted through the control panel

Laser source Professional welding laser-source, small in size, light inweight, and easy to move. The light emitting mode is more conducive to achieving a good welding effect. Support lasers with power from 1 kw to 3kw. All parameters are visible, real-time monitoring of the state of the whole machine, to ensure the stable operation of the welding head. Three large-diameter silent fans provide strong cooling capacity for the machine, en-suring that the machine works stably for 24 hours.

Standard equipped with intelli—gent control wire feeder, Ad-justable wire feeding delay,wire feeding speed, wire feed-ing distance, recovery dis-tance, etc.Our wire feeding system support max 3.0 mm diameter metal wire, and with the double motor inside the machine case which give the more stable support for the machine working.

Product ApplicationLaser Welding Ability carbon steel ■ Stainless steel Aluminum Galvanized sheet

Standard Accessories