Machining and cutting line with frontal blade Ø650 mm and bar passage 300x300 mm The machining unit tooled up with max 18 electrospindles and the cutting unit with infinite 360° blade rotation produce a continuous flow of processed and cut to measure elements. The additional machining module XMU carries out end milling (with blade, mill or mill units), head boring, tapping and milling, as well as 45° and 135° inclined cuts, guaranteeing maximum flexibility for numerous applications. 6 different variants are available, which can be configured in terms of length of material loading/unloading magazines and feed direction. Machining and cutting line double push with frontal blade Ø650 mm and bar passage 250x200 mm The machining unit tooled up with max 16 electrospindles and the cutting unit with 20° to 160° controlled blade tilt produce a continuous flow of machined and cut to measure elements. The separeted cutting and machining units maximise the increase in productivity. Cutting line with three up feed blades Ø550 mm The system, which is fully commanded by a numerical control, produces cut to measure elements by means of a bar feeder and a sawing machine with 3 blades set at 45° / 90° / 135° which ensure short cycles time for mass production. 8 different variants are available, which can be configured in terms of depth and length of material loading/unloading magazines, right/left feed direction and cutting unit type. Machining and cutting line with frontal Ø650 mm blade and bar passage 250x200 mm The machining unit tooled up with max 16 electrospindles and the cutting unit with 20° to 160° controlled blade tilt produce a continuous flow of machined and cut to measure elements. 20 different variants are available, which can be configured in terms of depth and length of material loading/unloading magazines and right or left feed direction. Cutting line with frontal blade Ø650 mm The system, which is fully commanded by a numerical control, produces cut to measure elements by means of a bar feeder and a sawing machine with frontal blade exit. 20 different variants are available, which can be configured in terms of depth and length of material loading/unloading magazines and right or left feed direction. Cutting line with frontal blade Ø500 mm The system, which is fully commanded by a numerical control, produces cut to measure elements by means of a bar feeder and a sawing machine with frontal blade exit. 4 different variants are available, which can be configured in terms of depth and length of material loading/unloading magazines, right/left feed direction and cutti

FomIndustrie FomFrance FomChina FomIndia FomRussia FomRomânia FomUSA FomTurkey FomEspaña FomAsia FomLatinoAmérica Comall FST profteQ Rim TexComputer GrafSynergy BCR CIMAtech LT 600 Cutting line with up feed blade Ø600 mm for 90° cut The system produces parts cut to size using a bar loading system and cutting machine with upward blade exit. 11 versions are available which can be configured in terms of depth and length of material loading/unloading magazines, right/left feed direction and cutting unit type. SOFTWARE FSTLine: the management software for cutting lines and cutting and machining lines....