Flammable and Toxic Gas Detection —Your partner in safety Focused Photonics (HangZhou) Inc. 760 Bin'an Road, Binjiang District Hangzhou 310052 China Tel: +86 571 8501 2188 Fax: +86 571 8679 1505 Copyright reserved. Specifications and designs are subject to change without prior notice Focused Photonics (HangZhou) Inc.

Company Profile Content Focused Photonic Inc. (also known as FPI) measures gas, air, dust and water, is one of the world's leading manufacturers of analytical instrumentation for industrial process and environmental monitoring. In late 1990's, FPI was initially registered in California, USA for research and development of Tunable Diode Laser (TDL) technology and utilization. The establishment of FPI in 2002 was shortly followed by its successful expansion to steel Industry where the cross-stack TDL of FPI built an exceptional reputation for the industries as benchmark process monitor. The entry...

Remote Laser Gas Detector Backed by decade expertise and research on utilization of TDL (Tunable Diode Laser) technology, the latest RLGD-100 is developed on a well proven technology platform. The RLGD-100, is a portable detector that allows high-sensitivity real-time detection of methane from a distance. Methane leaks can be quickly monitored by pointing the laser beam towards the suspected leak, or along the survey line. It enables easy access to hard-to-reach locations, and provides protection for operator and industrial applications against a wide range of potential leak sources. Principle...

Fixed Gas Detectors Metallurgy © Coal gas detection ® Coke making, iron making and steel making © Hot rolling, cold rolling and acid cleaning ® Confined space Pipeline ® Leak point in pipeline © Regulator station, pressure regulating box, gate well ® Boiler gas ® Hotel kitchen ® Sewage treatment FPI offers a rich gas detector portfolio that developed on electrochemical, catalytic combustion, photo ionization and infrared technologies. The GT series gas detectors are used to monitor flammable and toxic gases, oxygen, carbon dioxide, VOCs and other inorganic gases. The gas detectors can make a...

Detector accessories ■ Detector Controller The detector controller is used to supply power and process data for the gas detector. It is based on two-wire and three-wire systems. Product model: GC-1010-AA/AE, GC-1010-CA, and GC-1020-AA/AE. ■ RC-1000 Compared with traditional potentiometer, magnetic bar and one-way infrared remote control, RC-100 reveals its advantage in remotely acquiring data and setting parameters. With the ability to restore setting parameters, one RC-100 can be used for parameter setting and calibration for several detectors. Schematic Diagram of Networking (Networking based...

The detector can be mounted on a vertical/horizontal tube or wall. Leak source and leak accumulation should be identified and used in selecting the optimum detector mounting location within the area. Identify air current, wind patterns within the protected areas when choosing installation point. Installation height is determined by density of measured gas. Wired to controller/PLC/DCS (with power supply and isolated sourcing output) Note: Locations near excessive heat or vibration sources should be avoided if possible. Wiring Power wire 电源线 24V Ground wire 地线 信号线 Signal wire Wiring of intrinsically...

Product model Measuring principle Electrochemical Electrochemical Electrochemical Photoionization

Product model Product picture Alarm mode Audible alarm, can be connected to Audible alarm, can be connected to audible and visual alarm audible and visual alarm Audible and visual alarming Signal input Display mode 13 14 Flammable and Toxic Gas Detection-