Catalogs >
Focused Photonics Inc. >
FPI ATEX Certificate

FPI ATEX Certificate
2Pages

Catalog excerpts

QUALITY ASSURANCE NOTIFICATION Equipment and Protective System Intended for use in Potentially Explosive Atmospheres Manufacturers Notification Number: Explosion Protection concept(s) covered by this Notification: Focused Photonics (Hangzhou) Inc 760 Bin'an Road, Binjiang District Hangzhou, Zhejiang Intertek Testing & Certification Limited, Notified Body No. 0359 for Annexes IV and VII in accordance with Article 9 of the Council Directive 94/9/EC of 23 March 1994, confirms that the manufacturer has a quality system which complies with Annex IV (or) VII of the Directive. 5. Full details of the Audit are held on file ref: G101620649 6. This notification may be withdrawn if the manufacturer no longer satisfies the requirements of Annex IV (or) VII. Periodic inspection form part of this Notification. 7. This notification is valid until 20 May 2017 and can be withdrawn if the manufacturer does not satisfy the quality assurance re-assessment. 8. The CE marking shall be followed by the identification number 0359 identifying the notified body involved in the production control stage required by Article 10 [1] of the Directive 94/9/EC. 9. This notification may only be reproduced in its entirety and without any change, schedule included. Intertek Testing & Certification Limited R J Smith Intertek House, Cleeve Road, Leatherhead, Surrey, KT22 7SB Certification Officer Registered No 3272281 Registered Office: Academy Place, 1-9 Brook Street, Brentwood, Essex, CM14 5NQ. This certificate is subject to Intertek Testing and Certification's Conditions for Granting Certification. ExF-303 - Quality Assurance Notification

Open the catalog to page 1

QUALITY ASSURANCE NOTIFICATION Explosion Protection Concepts for which the Manufacturer has been assessed Equipment Types for which the Manufacturer has been assessed Diode Laser Gas Analyzer This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this...

Open the catalog to page 2