CEMS-2000D Continuous Dilution Emission Monitoring System

Product catalog summary

Overview
The CEMS-2000D is an ultra-low emission dilution monitoring system designed for extractive emission monitoring with adjustable dilution ratios ranging from 20 to 400 times. It is equipped with a dilution probe and multiple US EPA designated single gas analyzers, each operating independently to enhance detection limits.

Features

Dilution Extractive, UV fluorescence, Chemiluminescence technologies.
Measurement ranges: SO2/NOX/CO (0~50~10000 mg/m³), H2O (0~40%), O2 (0~25%).
Detection limit for SO2/NOX/CO is ≤0.1mg/m³.
Linearity is ≤±1%F.S., with span and zero drift ≤±2%F.S./24h.
Response time is less than 180 seconds.
Power supply requirements: 220V AC/50 Hz; 3kW.
Output options include 4~20mA, RS232, RS485, GPRS, and Ethernet connection.

Probe Principle
The dilution sampling probe accurately dilutes the sample gas stream, maintaining a dilution ratio between 20 to 400 times. It operates in a temperature-controlled environment with a heated filter, ensuring the dew point is below the lowest ambient temperature, thus avoiding the need for heated tracing lines and simplifying gas transportation.

Advantages

US EPA designated analyzers allow for low-level detection.
The dilution probe reduces the dew point, preventing sample condensation.
Flexible analyzer and module combinations cater to various industries.
Low maintenance due to system stability.

Applications

Thermal Power Plants
Cement Industry
Metallurgy Industry
Oil & Gas Industry

Catalog excerpts

CEMS-2000D Continuous Dilution Emission Monitoring System-1

For more information, visit our website at www.fpi-inc.com/en © Focused Photonics Inc. All right reserved. All trademarks are the property of Focused Photonics Inc. and its subsidiaries. Specifications, terms and pricing are subject to change. Focused Photonics (Hangzhou) Inc. No. 459, Qianmo Road, Binjiang District, Hangzhou, China Tel: +86 571 8501 2188 CEMS-2000 D ULTRA-LOW EMISSION DILUTION MONITORING SYSTEM

Open the catalog to page 1

CEMS-2000D Continuous Dilution Emission Monitoring System-2

Features • US EPA designated trace level monitoring analyzers CEMS-2000D is a dilution sampling based extractive emission monitoring system with adjustable dilution ratios between 20 to 400 times. The system consists of the dilution probe and multiple US EPA designated single gas analyzers, each gas analyzer works independently to enhance the detection limited ultimately. provide low-level detection possibilities; • Dilution probe reduces the dew point to low level, avoids sample condensation; • Flexible analyzer and module combination to comply different industries; • Low maintenance due to...

Open the catalog to page 2