*mydirectindustry

Catalogs
Focus LCDs
G255128A-FTW-DW63

G255128A-FTW-DW63

Product catalog summary

Overview:
The G255128A-FTW-DW63 is a 255x128 graphic LCD module featuring FSTN gray technology, a module size of 111.2x63.2mm, and both parallel and serial interfaces. It includes a white LED backlight, is transflective/positive, operates within a wide temperature range, and is RoHS compliant. The module operates at 3.3V and uses the ST7529 LCD IC.

Graphic LCD Features:

Resolution: 255x128 Dots
Interfaces: Parallel and Serial
RoHS Compliant

General Information:

Viewing Area: 90.00 (H) x 44.00 (V) mm
LCD Type: FSTN Positive
Viewing Angle: 12:00
Polarizer: Transflective
Backlight Type: LED (White)
Operating Temperature: -20 to +70 °C
Storage Temperature: -30 to +80 °C

Mechanical Information:

Module Size: 111.2mm (H) x 63.2mm (V) x 6.00mm (D)
Weight: TBD

Electrical Characteristics:

Supply Voltage: 3.3V
Input Voltage: -0.50 to VDD+0.5 V
Operating Temperature: -20 to 70 ℃
Storage Temperature: -30 to 80 ℃

Module Function:
For detailed timing characteristics, refer to the ST7529 specification. The module should be assembled firmly to avoid warping or twisting, and protected from physical shock.

Quality Inspection Process:
Refer to the provided link for detailed quality inspection standards.

Cautions and Handling Precautions:

Handle the module carefully to avoid damage to the polarizer and static damage to CMOS ICs.
Use appropriate cleaning materials and avoid certain chemicals that may damage the polarizer.
Store the module in a controlled environment to prevent condensation and exposure to direct sunlight.

Catalog excerpts

Open the catalog to page 1

Resolution: 255x128 Dots Interface(s): Parallel and Serial RoHS Compliant.

Open the catalog to page 2

1. DISPLAY TYPE: 255x128 FSTN POSITIVE GRAPHIC LCD 2. POLARIZER: TRANSFLECTIVE, POSITIVE MODE 6. DRIVE METHOD: 1/128 DUTY, 1/12 BIAS, VDD 3.3V

Open the catalog to page 3

<♦ FOCUS LCDs LCDs MADE SIMPLE® Register Select Input Pin - A0 = "H": DB0 to DB15 or SI are display data - A0 = "L": DB0 to DB15 or SI are control data Read/Write Execution Control Pin Connect to the standard 8-bit MPU bus via the 8 -bit bi-directional bus. When the following interface is selected and the XCS pin is high, the following pins become high impedance, which should be fixed to VDD or VSS. Read/Write Execution Control Pin Read / Write control input pin - RW = 'H": When E is “H", DBG to DB15 are in an output status. the tailing edge of the E signal._ Read enable clock input pin When...

Open the catalog to page 4

For more information on timing characteristics, please see the specification for ST7529 located here ST7529.pdf. For more information on the quality inspection process, please refer to https://focuslcds.com/content/LCD%20Quality%20Inspection%20Standards.pdf

Open the catalog to page 6

1. When the module is assembled, it should be attached to the system firmly. Do not warp or twist the module during assembly work. 2. Protect the module from physical shock or any force. In addition to damage, this may cause improper operation or damage to the module and back-light unit. 3. Note that polarizer is very fragile and could be easily damaged. Do not press or scratch the surface. 4. Do not allow drops of water or chemicals to remain on the display surface. If you have the droplets for a long time, staining and discoloration may occur. 5. If the surface of the polarizer is dirty, clean...

Open the catalog to page 7

G255128A-FTW-DW63

G255128A-FTW-DW63

Catalog excerpts

All Focus LCDs catalogs and technical brochures