*mydirectindustry

Catalogs
Focus LCDs
G12864B-BW-DW63

G12864B-BW-DW63

1 / 12 PagesView full catalog

G12864B-BW-DW63

Product catalog summary

Overview:

Resolution: 128x64 dots
Dimensions: 89.7x49.8mm (Area), 68.0x35.5mm (Viewing Area)
Type: STN Blue Negative, Transmissive
Interfaces: 8-bit Parallel (8080/6800) and 4-wire Serial
Temperature Range: Operating (-20° to 70°C), Storage (-30° to 80°C)
Backlight: 5V White LED
Controller: ST7565P
RoHS Compliant

Graphic LCD Features:

Built-in IC Controller: ST7565P
Built-in DC to DC Circuits

Mechanical Information:

Module Size: Length 89.7mm, Width 49.8mm, Height 6.0mm

Driver Method:

1/64 Duty, 1/7 Bias, VDD 3.0V, VLCD 8.5V

Block Diagrams:

Refer to the IC controller spec ST7565P for more information on internal voltage regulating circuits.

Input Terminal Pin Assignment:

30 pins with specific functions such as Chip Select, Reset, Data Input, Power Supply, etc.

Electrical Characteristics:

Operating Voltage: VDD 3.0V
LCD Driving Voltage: VLCD
Supply Voltage Logic: 0.3 to 1.0V

Signal Timing Characteristics:

8-bit Parallel Timing for 8080 and 6800 series
Serial Interface Timing
Reset Timing

Commands for Initialization:

Various commands for display control, such as Display On/Off, Page Address Set, Column Address Set, etc.

Cautions and Handling Precautions:

Handle with care to avoid physical damage and static discharge.
Clean with appropriate solvents like water or IPA.
Avoid high temperature and humidity during storage.

Catalog excerpts

Open the catalog to page 1

Interfaces: 8-bit parallel (8080/6800) and 4-wire Serial Built in IC Controller: ST7565P Built in DC to DC Circuits RoHS Compliant

Open the catalog to page 2

Stiffener^ — Conductor 2) . Display Type: STN-Blue/Negative/Transmissive 7) . Backlight Type: White LED Vf=5V/If=40mA Model Name:

Open the catalog to page 3

Block Diagrams C1 1uF~4.7uF C2 0.1uF~4.7uF NOTE: See IC controller spec ST7565P for more information on internal voltage regulating circuits. Additional information on DC-DC voltage regulating circuits for graphic LCD’s is available on our website at www.FocusLCDs.com.

Open the catalog to page 4

FSTN Type Display Module

Open the catalog to page 6

6. Signal Timing Characteristics 6.1 8-bit Parallel Timing Characteristics (8080-series)'

Open the catalog to page 7

6.2 8-bit Parallel Timing Characteristics (6800-series)'

Open the catalog to page 8

Related Pins

Open the catalog to page 9

7. Commands for Initialization of the Display Command

Open the catalog to page 11

8. Cautions and Handling Precautions 8.1 Handling and Operating the Module 1. When the module is assembled, it should be attached to the system firmly. Do not warp or twist the module during assembly work. 2. Protect the module from physical shock or any force. In addition to damage, this may cause improper operation or damage to the module and back-light unit. 3. Note that polarizer is very fragile and could be easily damaged. Do not press or scratch the surface. 4. Do not allow drops of water or chemicals to remain on the display surface. If you have the droplets for a long time, staining and...

Open the catalog to page 12

G12864B-BW-DW63

G12864B-BW-DW63

Catalog excerpts

All Focus LCDs catalogs and technical brochures