Diptico MICRON_ENG_esp 11/09/14 13:18 Página 1 MICRON SERIES technical features MICRON 5 Holding capacity: Maximum permitted block volume: Maximum melting capacity: LEVEL A LEVEL B LEVEL C MICRON SERIES Pumping rate: Number of outputs: Temperature range: Temperature control: Maximum working pressure (6 bar): Maximum installed power (230 VAC): External functions: Electrical requirements: 4,700 W (2 outputs) 7,100 W (4 outputs) 9,500 W (6 outputs) 5,700 W (2 outputs) 8,100 W (4 outputs) 10,500 W (6 outputs) 6,200 W (2 outputs) 8,600 W (4 outputs) 11,000 W (6 outputs) 7,700 W (2 outputs) 10,100 W (4 outputs) 12,500 W (6 outputs) Temperature output OK, low level output, input under maintenance, output inhibition external control. HOT/MELT MELTERS WITH PISTON PUMP 1 ~ N/PE 230V 50/60 Hz or 3 ~ N/PE 400/230V 50/60 Hz 3 ~ PE 230V 50/60 Hz with power adapter or 3 ~ PE 400V 50/60 Hz with transformer base. 587 x 341 x 481 587 x 341 x 628 Temperature range from 40 to 230°C (104 to 446°F), VP-200 automatic pressure control, transformer base for 400 VAC without neutral (not available for micron 35), air input filter, low-level sensor with or without warning light, granulate feeder. * Depending on the type of adhesive. FOCKE MELER reserves the right to modify the content of this catalogue without prior notice. Design and the cutting-edge technology have come together to create the Focke Meler Gluing Solutions Micron series For more information speak with your Focke Meler representative: Focke Meler Gluing Solutions, S.A. Pol. Los Agustinos, c/G, nave D-43 E-31160 Orkoien - Navarra - Spain Phone: +34 948 351 110 Fax: +34 948 351 130 [email protected] - www.meler.eu A Focke Group Company

Diptico MICRON_ENG_esp 11/09/14 13:19 Página 3 MICRON SERIES is synonymous with Efficiency Micron combines design and technology for optimum performance and profitable solutions. With its reduced size and rounded edges, the cutting-edge design of the Micron series enables it to be harmoniously integrated into any type of installation of machine. ENERGY EFFICIENCY Full opening of large airtight tank lid. This innovative product fully reduces the per kilo energy consumption of melt adhesive, resulting in significant cost and maintenance savings. Full accessibility. Joint in tank mouth to protect...

Diptico MICRON_ENG_esp 11/09/14 13:19 Página 3 MICRON SERIES is synonymous with Efficiency Micron combines design and technology for optimum performance and profitable solutions. With its reduced size and rounded edges, the cutting-edge design of the Micron series enables it to be harmoniously integrated into any type of installation of machine. ENERGY EFFICIENCY Full opening of large airtight tank lid. This innovative product fully reduces the per kilo energy consumption of melt adhesive, resulting in significant cost and maintenance savings. Full accessibility. Joint in tank mouth to protect...

Diptico MICRON_ENG_esp 11/09/14 13:18 Página 1 MICRON SERIES technical features MICRON 5 Holding capacity: Maximum permitted block volume: Maximum melting capacity: LEVEL A LEVEL B LEVEL C MICRON SERIES Pumping rate: Number of outputs: Temperature range: Temperature control: Maximum working pressure (6 bar): Maximum installed power (230 VAC): External functions: Electrical requirements: 4,700 W (2 outputs) 7,100 W (4 outputs) 9,500 W (6 outputs) 5,700 W (2 outputs) 8,100 W (4 outputs) 10,500 W (6 outputs) 6,200 W (2 outputs) 8,600 W (4 outputs) 11,000 W (6 outputs) 7,700 W (2 outputs) 10,100...