MANUAL GEAR SYSTEMS
2Pages

Catalog excerpts

Hot melt B4 melter for manual applications in both versions: piston and gear pump Handgun for line application and swirl application Wide range of flexible hoses with a lot of internal diameters and lengths GLUING SOLUTIONS ‘Plug and work’ The B4 has been specifically to suit manual and ‘low cost’ automatic applications. The unit will melt adhesive at a maximum rate of 6kg per hour. Two Pump Styles The gear pump version has a maximum pumping rate of 6kg per hour and a pressure relief valve to ensure a smooth delivery of the adhesive. The relief valve is easily adjusted from the outside of the melter. The piston pump version has a maximum pumping rate of 29.3kg per hour. The pressure regulator and gauge are also accessible from the outside of the melter allowing for easy adjustment. Electronic Control unit The electronic control of the B4 has been developed using the same proven design principles of all the new Meler products and it’s simple and reliable operation provides temperature control from 40ºC to 200ºC with an accuracy of ± 0.5ºC. Hose Connections The B4 has two hydraulic and electrical hose connections to the rear of the unit. The hydraulic connections are industrial standard 9/16 JIC and the electrical connections are available to heat the hose and gun with RTD control. Line/ Swirl Handgun system B4 Tank The melting tank of the B4 has a large surface area which gives an optimal melting rate. The tank has a large lid for loading adhesive and has a filter and drain valve for easy maintenance. Pump Motor The B4 gear unit has a stop/start switch for the motor and an external electrical input for automatically starting the pump motor by the main machine or gun trigger. Compatibility Compatibility is one of the main characteristics of B4 melters. They have been designed to be compatible with either PT100 or Ni120 temperature sensors and can therefore replace most hot melt equipment in

Open the catalog to page 1

Manual system with line handgun includes: · 1 x B4 melter piston or gear pump · 1 x handhose, length 2.4 o 3.0 m (other dimensions available) · 1 x handgun for line application · 1 x bead nozzle 0,50 (other dimensions available) Manual system with swirl handgun includes: · 1 x B4 melter piston or gear pump · 1 x handhose, length 2.4 o 3.0 m (other dimensions available) · 1 x handgun for swirl application · 1 x swirl nozzle 0,45 · 1 x air regulator unit 230 VAC · 1 x adaptor (wires and pneumatic pipe) for swirl handgun (length according handhose dimension) B4 MELTER Hot melt 4kg melter for...

Open the catalog to page 2

MANUAL GEAR SYSTEMS 2Pages

Catalog excerpts

All Focke Meler Gluing Solutions catalogs and technical brochures

MANUAL GEAR SYSTEMS
2Pages