Speed control using built-in pump control board Easy-to-use controls for temperatures Large tank lid to make charging easier The drain valve makes maintenance easier Big volume of pump filter GLUING SOLUTIONS B4 VS For small and medium consumptions Easy electronic control Available for Pt100 or Ni120 Full motor control Meler B 4 VS is a melting unit for Hot Melt adhesives for small and medium consumptions. Variable Flow This melter offers a wide range of manual and automatic flow adjustment options, by regulating the speed of the pump motor from 0 to 100 rpm. Hose connection B4 has two connections for the hose-applicator assembly. The hydraulic connections comply with the 9/16 18 UNF industrial standard. Electronic control B4 controls temperatures with a high degree of accuracy, from 40 to 200 degrees. Its safety system controls the following: Holding capacity Its large charging area means that it can be filled with different adhesive formats such as pellets, pillows and large blocks (PSA). - Breakage of the temperature sensor and overexcess temperature. - Protects against application malfunctions. - Communication with the main machine when the selected temperatures of all items have been reached. Thanks to its design, B4 VS is easy to clean and maintain. The B4 VS control has a built-in daily/weekly automatic start-up and stop timer.

TECHNICAL CHARACTERISTICS Options For more information speak with your Focke Meler representative: Focke Meler Gluing Solutions, S.A. Pol. Los Agustinos, c/G, nave D-43 E-31160 Orkoien - Navarra - Spain Phone: +34 948 351 110 Fax: +34 948 351 130 [email protected] - www.meler.eu A Focke Group Company C 042 - ENG - V0616 - FOCKE MELER reserves the right to modify the contents of this catalogue without notice.