Speed control using built-in pump control board Easy-to-use controls for temperatures Low level sensor of adhesive (optional) Air dryer (optional) Airtight cover with opening detection sensor The drain valve makes maintenance easier GLUING SOLUTIONS B4 VS PUR For small and medium consumptions Easy electronic control Available for Pt100 or Ni120 Full motor control Meler B 4 VS PUR is a melting unit for low and medium consumption for reactive adhesives. Variable Flow This device offers a wide range of manual and automatic flow adjustment options, by regulating the speed of the pump motor from 0 to 100 rpm. Hose connection B4 has two connections for the hose-applicator assembly. The hydraulic connections comply with the 9/16 18 UNF industrial standard. Electronic control B4 controls temperatures with a high degree of accuracy, from 40 to 200 degrees. Its safety system controls the following: Holding capacity This unit is designed to melt small PUR blocks of up to 3 kg. Once the device has been loaded, the adhesive is protected by an airtight cover and humidity-free gas injection system. - Breakage of the temperature sensor and over excess temperature. - Protects against application malfunctions. - Communication with the main machine when the selected temperatures of all items have been reached. The B4 VS PUR control has a built-in daily/ weekly automatic start-up and stop timer. Thanks to its design, B4 VS PUR is easy to clean and maintain.

507 For more information speak with your Focke Meler representative: Focke Meler Gluing Solutions, S.A. Pol. Los Agustinos, c/G, nave D-43 E-31160 Orkoien - Navarra - Spain Phone: +34 948 351 110 Fax: +34 948 351 130 [email protected] - www.meler.eu A Focke Group Company C 044 - ENG - V0616 - FOCKE MELER reserves the right to modify the contents of this catalogue without notice.