Speed control using built-in pump control board Easy-to-use controls for temperatures regulation Optional Low Level sensor with light tower Pneumatic cylinder for optimum contact between block and melting grille. With rod indicating end of block Swiveling tank lid allows quick and easy change of adhesive blocks 0.45L Teflon-coated reserve tank to make cleaning easier GLUING SOLUTIONS For small consumptions and discontinue production cycles Easy electronic control Available for Pt100 or Ni120 Full motor control Meler B4 Non Stop adhesive melters works mainly with moisturecure reactive polyurethane (PUR) hot melt adhesives in two- kilogram foil-encased blocks with maximum diameter 130 mm. The B4’s user-friendly design provides secure, precise and easy operation. It also offers simple maintenance, easy of cleaning and reduced adhesive waste. The concept ‘melt- on demand’ allows discontinued production cycles. After a partial consumption of the adhesive block you can stop and restart the production after some hours or days*. The Meler B4 Non Stop melts only the necessary adhesive for the application, and does protect the rest of the block from the heat. No extra dry air or nitrogene supply is necessary due to the air tight cylinder pressing system and due to the remaining protection bag of the adhesive. The pressure and melting system allows the entire use of the adhesive block, avoiding any waste of PUR adhesive. Electronic Control Unit The B4 Non Stop electronics controls precisely the temperatures in a range from 40ºC to 200ºC and the motor/pump speed to adapt the adhesive flow rate manually or automatically to the conditions of the application. Main Use Meler B4 Non Stop is used for manual and automatic applications with low glue consumption such as Clear Box Gluing in Graphic Arts Industry, product assembly applications in the Automotive Industry and Wood Working Applications such as Edge-Banding, etc. * For detailed operation instructions see user m

For more information speak with your Focke Meler representative: Focke Meler Gluing Solutions, S.A. Pol. Los Agustinos, c/G, nave D-43 E-31160 Orkoien - Navarra - Spain Phone: +34 948 351 110 Fax: +34 948 351 130 [email protected] www.meler.eu A Focke Group Company C 041 - ENG - V0516 - FOCKE MELER reserves the right to modify the contents of this catalogue without notice.