GLUING SOLUTIONS Automatic feeder Automatic maintenance of charging level in hot-melt melters. No contamination or carbonization. Alarm system that warns of possible charging faults or when the container is completely empty so that it can be refilled. Possibility of configuring the installation with a 50 kg container to increase system autonomy.

AUTOMATIC FEEDER Automatic maintenance of charging level in hot-melt melters The automatic feeders are accessories designed to be installed on all Meler melters. They provide significant benefits as they ensure a minimum level of adhesive inside the tank, removing the need for manual filling by the user. This results in time savings for the operator and decreases the risk of burn injuries thanks to the automatic filling system. A sensor inside the tank detects low adhesive levels and sends a signal to the suction system to transfer pellet charging to the melter tank. This operation stops when...

PARTS AND SPECIFICATIONS OF THE CONTAINER Optional grid Visibility of the adhesive level Suction tube incorporated in the container FEATURES › Suction tube incorporated in the container with vibrations to prevent the adhesive from compacting. › Easy charging access with folding lid. › Wheels to improve mobility. › Front window to display the level of adhesive. OPTIONAL ACCESSORIES › Minimum level sensor inside the container for refilling. › Remote reset: Used to reset the pellet charging after the alarms are activated, in situations in which the unit cannot be accessed by the user. › Optional...

TECHNICAL FEATURES For more information, contact your nearest Focke Meter distributor: 1 meler f£i Focke Meler Gluing Solutions, S. A. Pot. Los Agustinos, c/G, nave D-43 E-31160 Orkoien - Navarra - Spain Phone: +34 948 351 1 10 Fax: +34 948 351 130 info@metereu - www.meler.eu X C€ l_ _l A Focke Group Company C 012- ENG - V0917 - FOCKE MELER reserves the right to modify the content of this catalogue without prior notice.