fan-coils
6Pages

Accessories Dimensions Nozzles with adjustable finning (RD) Flexible ducts plenum chamber (PCF) This is connected to the PLD delivery plenum chamber, or to the post-heating section, the funnel with regulable fins has the function of delivering the air directly into the room. This section is ideal for simple and quick connections from the unit to flexible ducts for the distribution of treated air in the room. The PBC section is made from a plate frame with 2, 3 or 4 specially sized circular rings. X5 Delivery flange (CJE) X6 Fan speed control (RG) Suitable for wall installation, it allows to select one of the possible fan speeds. Power supply Temperatura limits Relative humidity limits Protection degree 230 ± 10% Vac 50/60Hz 0°C - 50°C 20 - 90% without condens IP20 Suitable for wall installation, it allows to control the room temperature (on/off control) both in summer and winter mode and to select the fan speed; the temperature sensor can be eventually far from the wall panel. X2 X2 X4 This section has the aim of making the connections between the unit and circuit easy. B H X1 X2 The CRE section is supplied if a post-heating is required and the water cannot be used. This section consists of a plenum chamber containing the modular heating elements able to supply the powers described. These elements having a reduced thickness allow air flow to be reduced to a minimum. The heating section with electrical heating elements requires a 400/3/50 three-phase power supply and may be controlled by the RR control panel and is supplied complete with safety thermostats and command relay. The power supply line protection must be installed by the installer. 230 ± 10% Vac 50/60Hz 6°C / 30°C 0,5°C ± 0,1°C 0°C - 50°C 20 - 90% without condens IP20 X1 X5 X3 Post-heating electrical section (CRE) Unit control panel (RR) Power supply Temperatura range Sensor temperature Temperatura limits Relative humidity limits Protection degree X6 X3 X2 A A X4 C P 18 16 14 CRE 150-160 CRE 210 AFI CRE 340-380 CRE 240 Pressure drop (Pa) CRE 100 PLA CRE 420 SM2 SM L3 12 L3 CLI-NOVO SHA L3 CW CRE PLD PCF L1 L1 L1 L1 L1 Kg1) Kg2) CJE 10 8 6 Delivery plenum chamber (PLD) 4 The delivery plenum chamber is supplied for all cases where air distribution uniformity is required. 0 2 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 Air capacity (m3/h) L2 Configurations RD RD A CJE CJE C H P X1 X2 X3 X4 X5 X6 L13) L23) L33) CLI-NOVO 100 640 295 450 750 295 135 306 - 199 137 140 23 30 200 50 400 CLI-NOVO 150 Horizontal version PCF 1000 295 450 750 295 139 290 186 95 135 136 33 45 200 50 400 CLI-NOVO 160 CRE 295 450 750 295 139 290 186 95 135 136 36 48 200 50 400 1100 322 500 835 322 159 306 170 159 151 144 40 54 200 50 400 CLI-NOVO 240 PLD 1000 CLI-NOVO 210 SHA PCF B 1340 322 535 950 322 279 306 170 279 152 143 48 63 200 50 400 CW CLI-NOVO H CRE 1340 372 535 950 322 237 328 210 237 238 114 55 72 200 50 400 1340 372 535 950 372 237 328 210 237 238 114 60 75 200 50 400 CLI-NOVO 420 PLD CLI-NOVO 340 CLI-NOVO 380 1640 372 535 950 372 387 328 210 387 238 114 71 86 200 50 400 1) Weight of horizontal version 2) Weight of vertical version 3) Accessories AFI CLI-NOVO SM/SM2 CW PLA CLI-NOVO V Fan-coils CEA RAR AFI Vertical version SISTEMAS VENTILACIÓN Y CLIMATIZACIÓN Josep Finestres, 9 08030 BARCELONA - Spain Tel. +34 93 278 82 77 Fax +34 93 278 82 67 www.novovent.com e-mail: novovent@novovent.com

Accessories Dimensions Nozzles with adjustable finning (RD) Flexible ducts plenum chamber (PCF) This is connected to the PLD delivery plenum chamber, or to the post-heating section, the funnel with regulable fins has the function of delivering the air directly into the room. This section is ideal for simple and quick connections from the unit to flexible ducts for the distribution of treated air in the room. The PBC section is made from a plate frame with 2, 3 or 4 specially sized circular rings. X5 Delivery flange (CJE) X6 Fan speed control (RG) Suitable for wall installation, it allows to...

Accessories Dimensions Nozzles with adjustable finning (RD) Flexible ducts plenum chamber (PCF) This is connected to the PLD delivery plenum chamber, or to the post-heating section, the funnel with regulable fins has the function of delivering the air directly into the room. This section is ideal for simple and quick connections from the unit to flexible ducts for the distribution of treated air in the room. The PBC section is made from a plate frame with 2, 3 or 4 specially sized circular rings. X5 Delivery flange (CJE) X6 Fan speed control (RG) Suitable for wall installation, it allows to...