DATA SHEET FMS Tension Control / Force Sensors • Robust and durable Overload protection up to 10-times nominal force, measuring body from stainless steel • For a wide range of applications 8 sizes with nominal force from 0.25 to 100 kN (56 to 22‘500 lbf.) •Wide measuring range with highest resolution Measuring range 30:1 Accuracy class ±0.5% UMGZ-Series The force sensors of the UMGZ-Series, designed for the measurement of material tension on continous processing lines, are used in combination with standard pillow blocks. Block mounting is simple utilizing four fasteners into the bottom surface. force measuring blocks of the UMGZ-Series feature longevity, precision and reliability. The UMGZ-Series is available in two versions, horizontal and vertical, and thus can be specified for use in any mounting orientation and strip wrap configuration. With the superior performance of the UMGZ-Series, accurate tension readings are obtained even with low web wrap angles and high roll weights. Functional description Standard pillow blocks are installed on the force measuring blocks of the UMGZ-Series. This design combines force sensor and bearing seat and allows for easy maintenance or exchange of the blocks, bearings and roll. The UMGZ-Series is available in two measuring versions, horizontal and vertical, and thus can be specified for use in any mounting orientation and material wrap configuration. The UMGZ-Se-ries design, incorporating dual bending beams, eliminates the load-specific influences of torque. The movement of the bending beams is detected by a set of strain gages arranged in a full bridge circuit. The resulting electrical signal, which is proportional to the applied force, is then amplified for use in monitoring or controlling web tension. With the superior performance of the UMGZ-Series, accurate tension readings are obtained even with low web wrap angles and high roll weights.

DATA SHEET FMS Tension Control  |  Force Sensors  | UMGZ-Series UMGZ-Series : Design and Dimensions UMGZ060-UMGZ500 Vertical UMGZ060-UMGZ100 Horizontal Horizontal or vertical force measuring block Horizontal plumber block force measuring block Vertikal Depending on the resulting measuring force direction, a horizontally or vertically measuring UMGZ force measuring block is selected. Orientation of the electrical connection Vertikal (resulting force) (resulting force) rotated 180° There is no electrical connection O for this version available. Simply rotate a block with W connection with 180°...

DATA SHEET FMS Tension Control | Force Sensors | UMGZ-Series UMGZ-Series : Scope of supply • force sensor • straight, waterproof connector (female) Options Orientation el. connection Measuring direction Nominal force rating in N UMGZ-Series : Accessories cable, 1 m (3.25 ft.) without connector • cable, 10 m (32.8 ft.) without connector • cable, 5 m (16.4 ft.) without connector • cable, 2 m (6.5 ft.) without connector • male flange connector, amphenol, straight • connector, amphenol, right a

DATA SHEET FMS Tension Control  |  Force Sensors  |  UMGZ-Series UMGZ-Series : Typical application Other products : Tension Control Tension Controllers Intrinsically Safe Barrier About us FMS Force Measuring Systems AG is the market leader in the field of web tension measurement, control and specialist for web guiding solutions. For the wire industry we are the only manufacturer offering a complete range of technologies for force measurement, data processing and radio transmission of signals. Our in house developed products are used in the manufacturing industry, converting, metals, paper, textiles,...