PMGZ-series
4Pages

DATA SHEET HIIS «FMS Tension Control / Force Sensors PMGZ-Series Hermetically sealed measuring block for the paper industry • Increased stiffness, robust Design IP 67, inert gas filled, resistant against moisture and increased temperature • Highest reliability Overload capacity at 10-times nominal force, stainless steel construction • Durability, corrosion resistant 2 year FMS warranty • Maximum Flexibility Nominal forces from 1 to 80 kN (225 to 17‘985 lbf.) PMGZ-Series The force sensors of the PMGZ-Series, designed for the measurement of strip tension on continous paper processing lines, are used in combiation with standard pillow blocks. This feature allows for easy maintenance or exchange of the blocks, bearings and roll. Block mounting is simple utilizing four fasteners into the bottom surface and mounting holes for the pillow block bearing are included based on your specifications. In addition, the 6 m cable allows for an electrical connection away from the harsh environment. The PMGZ-Series is available in two measuring, horizontal and vertical, and thus can be specified for use in any mounting orientation and strip wrap configuration. With the superior performance of the PMGZ-Series, accurate tension readings are obtained even with low web wrap angles and high roll weights. Functional description The PMGZ-Series design, incorporating dual bending beams, eliminates the load-specific influences of torque. The movement of the bending beams is detected by a set of strain gages arranged in a full bridge circuit. The resulting electrical signal, which is proportional to the applied force, is then amplified for use in monitoring or controlling web tension. The red point located on the sensor body indicates the positive measuring direction, and the substantial overload protection (10-times nominal force) translates to eliminated/minimized calibration issues due to machine upset conditions. The hermetically sealed sensor cover will provide protection for the measuring electronics inside the sensor body from dirt, etc.

DATA SHEET FMS Tension Control  |  Force Sensors  | PMGZ-Series PMGZ-Series : Dimensions Horizontal (all sizes excluding size 100) Straight connector with flexible protection hose Bottom view with mounting hole for machine frame Bore pattern for pillow blocks, please specify: L2, D1 and H1 (if 4 bores needed) Clearance zone: no bores in this area Horizontal or vertical measuring direction measuring block Cable Protection hose Screw joint protection hose PG gland without nut Nut protection hose Glas sealing vertical Sketch: depending on the direction of the resulting force, a horizontal or...

DATA SHEET FMS Tension Control | Force Sensors | PMGZ-Series PMGZ-Series : Order code Options Orientation el. connection (North) Measuring direction (Vertical) Nominal force rating in kN Size, design revision C PMGZ-Series : Options PMGZ-Series : Shaft diameter, Nominal forces PMGZ-Series : Scope of supply • force sensor • straight electrical connection • 6 m (19.7 ft.) cable • 5 m (16.4 ft.) cable protection hose, other lengths on request • the sealing of the open end of the cable is provided with a threaded connection M16 x 1.5mm (female thread required)

DATA SHEET FMS Tension Control  |  Force Sensors  |  PMGZ-Series PMGZ-Series : Typical application Other products : Tension Control Tension Controllers Intrinsically Safe Barrier About us FMS Force Measuring Systems AG is the market leader in the field of web tension measurement, control and specialist for web guiding solutions. For the wire industry we are the only manufacturer offering a complete range of technologies for force measurement, data processing and radio transmission of signals. Our in house developed products are used in the manufacturing industry, converting, metals, paper,...