FTP (GRP)
8Pages

® filtration technologies FTP SERIES CARTRIDGE FILTERS (GRP FILTER HOUSING) The permanent filtering solution

t ftp series cartridge filters Igrpl Fluytec GRP (Glass Fibre Reinforced Polyester) cartridge filters provide optimal behaviour with water of various degrees of salinity, reducing the maintenance needed in these conditions and optimizing the installation cost of filtering equipment. General description The bodies of these filters are designed according to the Ad-Merkblatt design code from pressure vessels and are made European Standard for Pressure Filters. possible to design equipment for different nominal pressures to order. The internal parts in contact with the water are of various...

Cartridge installation The bottom of the cartridge is located on the guide pipe, the base of which has a perimeter flange to seal the bottom end of The top is closed with a part exclusively designed and manufactured by Fluytec called "teat" which is pressed against the cartridge by the spring between it and the top and/or filter lid - Figures 2 and 3 -. This system ensures the perfect sealing of the cartridge, making it impossible for the fluid to pass through any place other than the filtering medium (the end purpose of the ■ Possibility of design for nominal pressures • Measurements for a...

t ftp series cartridge filters Igrpl 2. FTP Medium Flow series Traditional double flange type cartridge filters with 40 to 100 cartridges. These filters have inlet and outlet connections on the side of the body consisting of two flanges, an upper one, also called the closure, and a low one at the bottom, on which the cartridges are housed. Virgen del Milagro desalination plant, Mazarrón (Murcia^ Cartridge installation The bottom of the cartridge is located on the guide pipe, the base of which has a perimeter flange to seal the bottom end of The top is closed with a part exclusively designed...

ftp series cartridge filters lgi< Flow series: double flange Traditional double flange type cartridge filters with 120 to 400 cartridges. These filters have inlet and outlet connections on the side of the body consisting of two flanges, an upper one, also called the closure, and a low one at the bottom, on which the cartridges are housed. Cartridge installation The bottom of the cartridge is located on the guide pipe, the base of which has a perimeter flange to seal the bottom end of The top is closed with a part exclusively designed and manufactured by Fluytec called "teat" which is...

series cartridge filters Igrpl Flow series: swords system Cartridge filters with sword system and single flange for high flows. Filters consisting of a body with a single flange in which the inlet connection is at the bottom while the outlet is in the top lid The false bottom plate on the flange is the support from which the swords hang. Cartridge installation The filter cartridges are mounted on swords, supports with their heads screwed into the false bottom plate and with a nut threaded onto their tops to seal the cartridge The lower plastic grille gives the filter pack the necessary...

ftp series cartridge filters lgi< Fluytec references Fluytec filters process 9,000,000 m3 per day in installations worldwide, making it the leader in the national market and with an increasing international presence. The following table shows some references for Fluytec projects, reflecting its worldwide Baix Llobregat Sant Joan Despi SWRO Águilas Guadalentín SWRO Rabigh IWPP Hamma SWRO Bahia de Palma SWRO Country Capacity mVday Saudi Arabia Saudi Arabia Trinidad and Tobago SWRO Trinidad and Tobago Aruba SWRO Netherlands Antilles -luytec installations in various parts of the world....

Subject to change without notice. Other products in this range: ■ FTI series cartridge filters (SS, CS) ■ FTPV series cartridge filters (PVC) ■… See our Web site for other design criteria Fluytec solutions worldwide Camino de Sakoni, 18 • 48950 Erandio - Vizcaya (Spain) • T: (+34) 94 467 61 50 • F: (+34) 94 467 61 53 info@fluytec.com • www.fluytec.com v.1.