Fluxtrol's AlphaForm
30Pages

AlphaForm is a Fast and Easy to Apply, Induction Magnetic Flux Concentrator Fluxtrol’s AlphaForm high and low frequency, soft, moldable magnetic field concentrators can be used with any copper coil for quick, efficient results. Fluxtrol.com 1-248-393-2000

Fluxtrol’s AlphaForm is a Hand Moldable Induction Heating Concentrator • AlphaForm is a hand moldable concentrator • AlphaForm can conform to tube style coils • AlphaForm can be used with almost any induction coil geometry • AlphaForm can be hand ground for a more precise shape • AlphaForm can work with any induction frequency • AlphaForm that is not used is not wasted and can be stored again • AlphaForm is great for induction process development • AlphaForm can give better heat pattern and control • AlphaForm can reduce heat time and energy used by 20 – 50% Fluxtrol.com 1-248-393-2000

AlphaForm Moldable Induction Concentrator AlphaForm comes in a container about 5.5” X 5.0” X 3/8” and is easy to work with. Although AlphaForm has a long shelf life, it will be even longer if it is kept cool or even frozen until needed. Fluxtrol.com 1-248-393-2000

How to Attach AlphaForm Hand Moldable Induction Flux Concentrator to Induction Heating Coils Warm the AlphaForm to room temperature and cut off the amount needed. To more easily mold AlphaForm place it in an oven or use a heat gun, not to exceed 140 F as curing may begin. Fluxtrol.com 1-248-393-2000

Recommended Tools to Attach AlphaForm Hand Moldable Induction Flux Concentrator to Induction Coils We recommend using gasline Teflon tape and heavy duty aluminum foil, 0.024 millimeters (0.9 mils) Fluxtrol.com 1-248-393-2000

AlphaForm Hand Moldable Induction Flux Concentrator Place a piece of heavy duty aluminum foil along the working edge of the coil. This will provide a flat surface to form the AlphaForm against. Avoid using standard aluminum foil as it may be difficult to remove after curing. Fluxtrol.com 1-248-393-2000

AlphaForm Hand Moldable Induction Flux Concentrator Warm the AlphaForm to room temperature and cut or tear off the amount needed. Fluxtrol.com 1-248-393-2000

AlphaForm Hand Moldable Induction Flux Concentrator Press the AlphaForm onto the desired areas of the induction coil. Fluxtrol.com 1-248-393-2000

AlphaForm Hand Moldable Induction Flux Concentrator Place a heavy duty aluminum foil along the working edge of the induction coil to create a flat surface to help shape the AlphaForm. Fluxtrol.com 1-248-393-2000

AlphaForm Hand Moldable Induction Flux Concentrator Add layers of AlphaForm to the induction coil as needed. Fluxtrol.com 1-248-393-2000

AlphaForm Hand Moldable Induction Flux Concentrator Unused AlphaForm can be returned to the container, so there is no waste. Fluxtrol.com 1-248-393-2000

AlphaForm Hand Moldable Induction Flux Concentrator Wrap Teflon tape around the AlphaForm to hold it tight against the coil. If not held in place, AlphaForm may shift slightly during curing. Fluxtrol.com 1-248-393-2000

AlphaForm Hand Moldable Induction Flux Concentrator To cure the AlphaForm, place coil in an oven at 250°F (120°C) for one hour. Then increase the temperature to 375°F (190°C) for an additional hour. Fluxtrol.com 1-248-393-2000

AlphaForm Hand Moldable Induction Flux Concentrator After curing, remove the Teflon tape from the AlphaForm. Fluxtrol.com 1-248-393-2000

AlphaForm Hand Moldable Induction Flux Concentrator After the Teflon tape, remove all the aluminum foil. Fluxtrol.com 1-248-393-2000

AlphaForm Hand Moldable Induction Flux Concentrator No machining is necessary, but you can grind it to assist in creating the shape you need. Fluxtrol.com 1-248-393-2000

Extra or Left Over AlphaForm Hand Moldable Induction Flux Concentrator Can Be Stored Again AlphaForm has a long shelf life, it will be even longer if it is kept cool or even frozen until needed. Fluxtrol.com 1-248-393-2000

Induction Hairpin Coil AlphaForm Heating Comparison Right, a 3/16” hairpin induction coil without AlphaForm after 20 seconds of heating Right, a 3/16” hairpin induction coil with AlphaForm after 20 seconds of heating Fluxtrol.com 1-248-393-2000

AlphaForm Hand Moldable Induction Flux Concentrator for Tubing Coils Efficiency Fluxtrol’s AlphaForm soft, moldable magnetic flux concentrators can be used with any copper tubing for quick improvements. Fluxtrol.com 1-248-393-2000

AlphaForm for Induction Process Development • • • Apply AlphaForm to the induction coil Test your specific heating application If it yields good results, cure it in an oven to permanently attach the AlphaForm to the induction coil. It can be added to improve a coil and easily removed after testing. Fluxtrol.com 1-248-393-2000

AlphaForm Formable Concentrator on Induction Pancake Style Coil AlphaForm can conform to almost any coil geometry AlphaForm can reduce heat time and energy by 20 - 50%, with better heat pattern and control Fluxtrol.com 1-248-393-2000

AlphaForm Induction Concentrator Induction heating comparison of a bare induction pancake coil and the same coil and power with the application of AlphaForm, after 18 seconds of heating. Fluxtrol.com 1-248-393-2000

AlphaForm, Soft, Moldable Induction Magnetic Flux Concentrator for Multi-turn I.D. Coils Fluxtrol’s AlphaForm High and Low Frequency, Soft, Moldable Magnetic Field Concentrators Can be Used with Difficult Induction Coil Geometries and Can be Pressed Into Tight Spaces. Fluxtrol.com 1-248-393-2000

AlphaForm, Doesn’t Need an Insulating Material Between the Induction Coil Turns Fluxtrol’s AlphaForm is a soft, moldable magnetic field concentrator that doesn’t need an insulating material between the coil turns in most applications. Fluxtrol.com 1-248-393-2000

AlphaForm is Perfect for Small Induction Tubing A cut through a multi-turn 3/16”, I. D. induction tubing coil reveals that Fluxtrol’s AlphaForm, bonds completely with the coil without gaps or separation. Fluxtrol.com 1-248-393-2000