Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Fluxtrol, Inc.
  3. Alphaform LF

Alphaform LF

Alphaform LF
1 / 1 PageView full catalog

Alphaform LF

Product catalog summary
Specifications:
  • Density: 4.1 g/cm3 ± 2%
  • Saturation Flux Density: 1.0 T
  • Operating Frequency Range: 1–80 kHz
  • Major Frequency Range: 3–50 kHz
  • Temperature Resistance: 225°C long term, 300°C short term
  • Thermal Conductivity: 0.02 W/cm°C
  • Resistivity: >15 kOhmcm
Material Description:

The AlphaForm LF is a formable soft magnetic composite developed using magnetic particles with a thermal-curing epoxy binder. It is designed for quick and efficient installation to induction coils with low tolerances, eliminating the need for additional electrical insulation of the coil turns.

Performance:

The AlphaForm LF core significantly increases the efficiency of the "earmuff" brazing coil.

Recommendations:

Each grade of Fluxtrol material has unique properties suited to specific application conditions, process types, coil designs, and frequencies. For optimal material selection, contact Fluxtrol or a local distributor.

See more

Catalog excerpts

Alphaform LF-1

Low to Medium Frequency Soft Magnetic Composite [Frequency Range: 1 – 80 kHz] Formable soft magnetic composite developed on the basis of magnetic particles with a thermal-curing epoxy binder. This material may be used for quick and efficient installation to induction coils with low tolerances. No additional electrical insulation of the coil turns is necessary. Initial Permeability Maximum Permeability Saturation Flux Density Operating Frequency Range 225 Long Term 300 Short Term Thermal Conductivity Temperature Resistance Major Frequency Range AlphaForm LF core dramatically increased efficiency of the “earmuff” brazing coil 1388 Atlantic Blvd. l Auburn Hills, MI 48326 USA l P: 1.248.393.2000 l 1.800.224.5522 USA l F: 1.248.393.0277 l fluxtrol.com Each grade of Fluxtrol material has its own distinctive properties that are the most beneficial to certain application conditions, process type, coil design, frequency, etc. Contact Fluxtrol or your local distributor for more information about which material is optima

 Open the catalog to page 1

All Fluxtrol, Inc. catalogs and technical brochures

  1. Ferrotron 559H
    Ferrotron 559H

    2  Pages

  2. Fluxtrol 50
    Fluxtrol 50

    2  Pages

  3. Fluxtrol 25
    Fluxtrol 25

    2  Pages

  4. Fluxtrol Brochure
    Fluxtrol Brochure

    8  Pages

  5. FLUXTROL-A
    FLUXTROL-A

    1  Page

  6. Fluxtrol 100
    Fluxtrol 100

    1  Page

  7. Fluxtrol's AlphaForm
    Fluxtrol's AlphaForm

    30  Pages

  8. fluxtrol Catalog
    fluxtrol Catalog

    59  Pages

  9. Composite Materials for Magnetic Field Control in EPM
    Composite Materials for Magnetic Field Control in EPM

    4  Pages

  10. Virtual Prototyping of Induction Heat Treating
    Virtual Prototyping of Induction Heat Treating

    5  Pages

  11. Temperature Prediction and Thermal Management for Composite Magnetic Controllers of Induction Coils
    Temperature Prediction and Thermal Management for Composite Magnetic Controllers of Induction Coils

    8  Pages

Related Searches
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.