*mydirectindustry

VISCOFLUX lite

Product catalog summary

Overview: The VISCOFLUX lite is designed for transferring higher-viscosity media that are just capable of flowing. It is suitable for drums with an inner diameter of 571.5 mm and sea container drums, leaving less than 1% residue in the drum. The system is compact, mobile, and easy to assemble, consisting of a pump centring plate and a follower plate with a process seal.

Specifications:

Drum Compatibility: 200 L, ISO drums, and sea container drums.
Dimensions: Inner diameter of 571.5 mm; top diameter of 540 mm; bottom diameter of 571 mm.
Materials: Various materials are used for different components, including PE, stainless steel, and conductive materials for hazardous areas.
Weight: Pump centring plate approximately 6.5 kg; follower plate with process seal approximately 13 kg.

Components:

Pump centring plate and follower plate with process seal.
Air connection via quick coupling type 26 (6-8 bar).
Ex-marking for hazardous areas: II 1 G IIB TX.

Performance:

Delivery rate: Maximum 50 l/min for standard version, 30 l/min for Ex version, depending on pump, motor, and medium.
Immersion length: 1000 mm.

Compatible Equipment:

Recommended pumps: Eccentric worm-drive pumps type F 550 with various configurations.
Compatible motors: Options include three-phase motors and commutator motors with different power ratings and gear ratios.

Part Numbers:

VISCOFLUX lite: Part no. 10-001 22 310.
Process seals: Various options available with specific part numbers for different materials.

Additional Information: The document includes detailed part numbers for various components and accessories, as well as recommendations for pumps and motors suitable for both standard and Ex versions of the VISCOFLUX lite system.

Catalog excerpts

VISCOFLUX lite VISCOFLUX lite Advantages / Characteristics ► For transfer of higher-viscosity media which are just capable of flowing ► For drums with an inner diameter of 571.5 mm and sea container drums ► Less than 1 % residue in the drum ► Consisting of pump centring plate, follower plate with process seal ► Requires little space ► Mobile for easy transport to the drum ► Easy to assemble due to only a few components ► Follower plate for air-tight sealing of the medium ► For the use with FLUX eccentric worm-drive pumps ► Versions available for the use in hazardous areas zone 0/1 <5^ ®

Open the catalog to page 1

Dimensions VISCOFLUX lite 1. Pump centring plate 2. Follower plate with process seal Ex version with equipotential bonding System dimensions 3. ump centring plate P Ex version with equipotential bonding Required room height for erection: Approx. 2200 mm, without motor System height assembled (dependent on pump version and motor)

Open the catalog to page 2

Other pump versions, motors and accessories on request

Open the catalog to page 3

VISCOFLUX lite Ex Description Recommended pumps for VISCOFLUX lite Ex Eccentric worm-drive pumps type F 550, with outer diameter 50 mm in stainless steel, with G 1 A A discharge connection, open mechanical seal, seal material FKM, torsion shaft, immersion length 1000 mm, incl. stator (PTFE black) and stator housing (without hose connection) Other pump versions, motors and accessories on request FLUX-GERATE GMBH Talweg 12 ■ D-75433 Maulbronn Tel +49 (0)7043 101-0 ■ Fax +49 (0)7043 101-444 [email protected] ■ www.flux-pumps.com

Open the catalog to page 4

VISCOFLUX lite

VISCOFLUX lite

Catalog excerpts

All FLUX-GERÄTE GMBH catalogs and technical brochures

Archived catalogs