*mydirectindustry

Catalogs
FLUX-GERÄTE GMBH
Technical Datasheet VISCOFLUX lite Ex

Technical Datasheet VISCOFLUX lite Ex

Product catalog summary

Overview: The VISCOFLUX lite is designed for transferring higher-viscosity media from drums with an inner diameter of 571.5 mm, including sea container drums. It ensures less than 1% residue remains in the drum and is composed of a pump centring plate and a follower plate with a process seal. The system is compact, mobile, and easy to assemble.

Specifications:

Compatible with 200 L ISO drums and sea container drums.
Dimensions: Inner diameter of 571.5 mm, with specific top and bottom diameters for the Ex version.
Materials include PE, stainless steel, and various conductive materials for different components.
Weight: Pump centring plate approximately 6.5 kg (7.5 kg for Ex version); follower plate with process seal approximately 13 kg (13.6 kg for Ex version).

Technical Data:

Air connection: Quick coupling type 26 (6-8 bar).
Delivery rate: Up to 50 l/min depending on pump, motor, and medium.
Immersion length: 1000 mm.

Components and Compatibility:

Compatible with FLUX eccentric worm-drive pumps, specifically types F 550 GS6/GS/S and F 550 GS6X/GSX/SX.
Various process seals available, including NBR and FKM in different colors and conductive properties.
Compatible motors include three-phase and commutator motors with different power ratings and gear ratios.

Ex Version:

Designed for use in hazardous areas (zone 0/1).
Includes equipotential bonding for safety.
Requires additional accessories such as earth ground wires with grounding clamps.

Part Numbers: Detailed part numbers are provided for various components, including pump centring plates, follower plates, process seals, and compatible motors for both standard and Ex versions.

Catalog excerpts

VISCOFLUX lite VISCOFLUX lite Advantages / Characteristics ► For transfer of higher-viscosity media which are just capable of flowing ► For drums with an inner diameter of 571.5 mm and sea container drums ► Less than 1 % residue in the drum ► Consisting of pump centring plate, follower plate with process seal ► Requires little space ► Mobile for easy transport to the drum ► Easy to assemble due to only a few components ► Follower plate for air-tight sealing of the medium ► For the use with FLUX eccentric worm-drive pumps ► Versions available for the use in hazardous areas zone 0/1 <5^ ®

Open the catalog to page 1

Dimensions VISCOFLUX lite 1. Pump centring plate 2. Follower plate with process seal Ex version with equipotential bonding System dimensions 3. ump centring plate P Ex version with equipotential bonding Required room height for erection: Approx. 2200 mm, without motor System height assembled (dependent on pump version and motor)

Open the catalog to page 2

Other pump versions, motors and accessories on request

Open the catalog to page 3

VISCOFLUX lite Ex Description Recommended pumps for VISCOFLUX lite Ex Eccentric worm-drive pumps type F 550, with outer diameter 50 mm in stainless steel, with G 1 A A discharge connection, open mechanical seal, seal material FKM, torsion shaft, immersion length 1000 mm, incl. stator (PTFE black) and stator housing (without hose connection) Other pump versions, motors and accessories on request FLUX-GERATE GMBH Talweg 12 ■ D-75433 Maulbronn Tel +49 (0)7043 101-0 ■ Fax +49 (0)7043 101-444 [email protected] ■ www.flux-pumps.com

Open the catalog to page 4

Technical Datasheet VISCOFLUX lite Ex

Technical Datasheet VISCOFLUX lite Ex

Catalog excerpts

All FLUX-GERÄTE GMBH catalogs and technical brochures

Archived catalogs