Catalogs >
FLUX-GERÄTE GMBH >
Pump kits

Pump kits
12Pages

Add to favorites

Catalog excerpts

More than just pumps Pump kits

Open the catalog to page 1

FLUX Pump Kits for: Acids and alkalis Concentrated acids and "AdBlue®" Petroleum products Flammable liquids Universal applications 99,98 % drum emptying FLUX Pump Kits include everything for immediate operation. They consist of : • Motor • Pump • Hose • Quick action tap • Compression gland No longer do you have the tedious chore of leafing through catalogues for numerous items, they are all contained in the FLUX Pump Kit. Select the most suitable combination and see the advantages of buying a FLUX Pump Kit, the all-inclusive service!

Open the catalog to page 3

FLUX Pump Kit „JUNIORFLUX“ For filling, emptying, transferring or dispensing acids and alkalis, such as battery acid, ammonia water, glycol, caustic soda and soapy water. Delivery rate max. 40 l/min, delivery head max. 5,2 m.* When using the pump with a discharge hose and a hand tap, the delivery rate will be approx. 15 l/min. Viscosity max. 250 mPas (cp), temperature max. 45 °C. JUNIORFLUX F 314 PP-25/19 in Polypropylene sealless, shaft in Hastelloy C, impellor in ETFE, outer-Ø 25 mm, thread on outlet G 1 A (BSP 1“ male) Commutator motor FEM 3070, 230 Volt, 50 Hz, 230 Watt, IP 24, with...

Open the catalog to page 4

FLUX Pump Kit ^Acids" For transferring acids like boric acid, fruit acids, phosphoric acid, hydrochloric acid and sulphuric acid (at 80 %). Delivery rate max. 165 1/min, delivery head max. 9,5 m.* When using the pump with a discharge hose and a hand tap, the delivery rate will be approx. 40 1/min. Viscosity max. 600 mPas (cp), temperature max. 50 °C. Drum pump F 430 PP-40/33 in Polypropylene with mechanical seal in ceramic oxide, PTFE/carbon, seal in FKM, shaft in Hastelloy C, impellor in ETFE, outer-0 40 mm, thread on outlet G 11 /4 A (BSP 11 /A" male) Commutator motor FEM 4070, 230 Volt,...

Open the catalog to page 5

For transferring concentrated acids like hydrobromic acid, chloric acid, hydrofluoric acid, nitric acid, sulphuric acid and sodium hypochlorate. Delivery rate max. 1 70 1/min, delivery head max. 9,5 m.* When using the pump with a discharge hose and a hand tap, the delivery rate will be approx. 40 1/min. Viscosity max. 600 mPas (cp), temperature max. 100 °C. Drum pump F 430 PVDF-40/33 in Polyvinyliden fluoride with mechanical seal in ceramic oxide, PTFE/carbon, seal in FKM, shaft in Hastelloy C, impellor in ETFE, outer-0 40 mm, thread on outlet G 11 /4 A (BSP 11 /4" male) Commutator motor F...

Open the catalog to page 6

FLUX Pump Kit „Petroleum Products“ For transferring petroleum products like diesel oil, fuel oil, hydraulic oil, lube oil and engine oil. Delivery rate max. 215 l/min, delivery head max. 10 m.* When using the pump with a discharge hose and a hand tap, the delivery rate will be approx. 65 l/min. Viscosity max. 600 mPas (cp), temperature max. 80 °C. Drum pump F 430 AL-41/38 in Aluminium alloy with mechanical seal in ceramic oxide, PTFE/carbon, seal NBR, shaft in stainless steel 316 Ti, impellor in ETFE, outer-Ø 41 mm, thread on outlet G 11/4 A (BSP 11/4“ male) Commutator motor FEM 4070, 230...

Open the catalog to page 7

FLUX Pump Kit „Flammable Liquids“ For transferring flammable liquids like acetone, butyl alcohol, ethyl alcohol, methyl alcohol, gasoline, toluene, xylene, etc. Delivery rate max. 200 l/min, delivery head max. 9,5 m.* When using the pump with a discharge hose and a hand tap, the delivery rate will be approx. 50 l/min. Viscosity max. 600 mPas (cp), temperature max. 100 °C. Drum pump FP 424 Ex S-43/38 in stainless steel tested and certified according to ATEX-Directive 94/9/EC (valid until 20.04.2016) and ATEX-Directive 2014/34/EU (valid from 20.04.2016), category 1/2, for use in Zone 0....

Open the catalog to page 8

FLUX Pump Kit ^universal Applications" In the following industries: paint, varnish, food, cosmetic and pharmaceutical. Delivery rate max. 240 l/min, delivery head max. 13 m.* When using the pump with a discharge hose and a hand tap, the delivery rate will be approx. 50 l/min. Viscosity max. 800 mPas (cp), temperature max. 100 °C. Drum pump F 430 S-41/38 in stainless steel tested and certified according to ATEX-Directive 94/9/EC (valid until 20.04.2016) and ATEX-Directive 2014/34/EU (valid from 20.04.2016), category 1/2, for use in Zone 0. with mechanical seal in ceramic oxide, PTFE/carbon,...

Open the catalog to page 9

FLUX Pump Kit „99,98 % Drum Emptying“ The safe and cost-efficient solution for transferring high value or hazardous liquids. Delivery rate max. 115 l/min, delivery head max. 8 m.* When using the pump with a discharge hose and a hand tap, the delivery rate will be approx. 35 l/min. Viscosity max. 600 mPas (cp), temperature max. 100 °C. Drum pump FP 425 Ex S-41/34 in stainless steel tested and certified according to ATEX-Directive 94/9/EC (valid until 20.04.2016) and ATEX-Directive 2014/34/EU (valid from 20.04.2016), category 1/2, for use in Zone 0. with mechanical seal in ceramic oxide,...

Open the catalog to page 10

More than just pumps Today the FLUX name is recognised around the globe as the trademark for top standards in pump technology. Everything started with the invention of the electric drum pump in 1950. Nowadays FLUX has an extensive range of products each of which can be customized. FLUX pumps are used for example in the chemical and pharmaceutical industries; in machinery and plant engineering as well as companies in electroplating, effluent treatment and the foodstuffs sector. Whether single-product or system solution -FLUX quality is synonymous with a long service life, excellent economy...

Open the catalog to page 12