*mydirectindustry

Catalogs
FLUX-GERÄTE GMBH
FLUX Flow meter FMO 140

FLUX Flow meter FMO 140

Product catalog summary

Overview: The document is a technical data sheet for the Flow Meter FMO, highlighting its design, specifications, and applications. It includes detailed technical data for various models and configurations, as well as information on the digital display unit FLUXTRONIC®.

Advantages/Characteristics:

Oval rotor design suitable for a range of viscosities.
Integrated digital display unit FLUXTRONIC® or available as a pulse version.
Compatible with drum/eccentric worm-drive pumps or piping systems.
Flow rate range: 0.04 - 380 l/min with high accuracy and repeatability.
Display options in liters, gallons, or kilograms.
Ex-application suitability in zone 1.

Technical Specifications:

Models: FMO 101, 102, 104, 110, 140, 150 with various material and connection options.
Viscosity range: Up to 500,000 mPas.
Measurement error: ±0.5% to ±2.5% depending on viscosity.
Operating temperature: -30°C to +120°C depending on application.
Operating pressure: Up to 200 bar.
Protection class: IP 54.
Ex-marking: II 2 G Ex c TX.

Digital Display Unit FLUXTRONIC®:

Simple operation with data retention on battery replacement.
Four safety levels with PIN setting.
Calibration on medium possible.
Ex-proofed with ambient temperature range of -20 to +40°C.

Mounting and Installation:

Ensure proper mounting to avoid damage from rotor weight.
Various mounting positions and pressure drop considerations based on viscosity.

Additional Components:

Switching amplifiers for Ex and non-Ex applications.
Connecting cables and protective caps available.

Catalog excerpts

Flow meter FMO Flow meter FMO Advantages/characteristics: ► Oval rotor design ► For low-viscosity to high-viscosity media ► With integrated digital display unit FLUXTRONIC® or available as pulse version ► Depending on type for use with drum/eccentric worm-drive pump or for use in piping ► Flow rate of 0,04 - 380 l/min ► High accuracy and repeat accuracy ► Signal transduction at FLUXTRONIC® or other external control e. g. PCC possible ► Display in litre, gallon or kilogram possible ► Semiautomatic filling in connection with a switching amplifier possible ► For Ex-application in zone 1 (' Difference between the average measured values of a series of the measurements and the theoretical value (2 Bandwidth between several measurements under identical conditions * Version Reed/Reed or Hall/Hall possible

Open the catalog to page 1

Technical data/type Difference between the average measured values of a series of the measurements and the theoretical value Bandwidth between several measurements under identical conditions Version Reed/Reed or Hall/Hall possible

Open the catalog to page 2

FMO 104/110 in pulse version (without FLUXTRONIC®)

Open the catalog to page 3

Flow meter with FLUXTRONIC®

Open the catalog to page 4

Technical data Control cable 5 m Flow meter/FSV Control cable 10 m Flow meter/FSV e. g. for switching the motor and valve

Open the catalog to page 5

Mounting position FMO When mounting the flow meter type FMO make sure that neither the bottom nor the cover of the meter housing will be ground off by the weight of the oval rotors. FLUX-GERATE GMBH Talweg 12 ■ D-75433 Maulbronn Tel +49 (0)7043 101-0 ■ Fax +49 (0)7043 101-444 [email protected] ■ www.flux-pumps.com

Open the catalog to page 6

FLUX Flow meter FMO 140

FLUX Flow meter FMO 140

Catalog excerpts

All FLUX-GERÄTE GMBH catalogs and technical brochures

Archived catalogs