*mydirectindustry

Catalogs
FLUX-GERÄTE GMBH
FLUX Flow meter FMO 110

FLUX Flow meter FMO 110

Product catalog summary

Overview: The document is a technical data sheet for the Flow Meter FMO, highlighting its design, specifications, and applications. It includes detailed technical data for various models and configurations, as well as information on the digital display unit FLUXTRONIC®.

Advantages/Characteristics:

Oval rotor design suitable for a range of viscosities.
Integrated digital display unit FLUXTRONIC® or available as a pulse version.
Compatible with drum/eccentric worm-drive pumps or piping systems.
Flow rate ranges from 0.04 to 380 l/min with high accuracy and repeatability.
Display options in liters, gallons, or kilograms.
Ex-application suitability in zone 1.

Technical Specifications:

Models: FMO 101, 102, 104, 110, 140, 150 with various material and connection options.
Viscosity range: Up to 500,000 mPas.
Measurement error: Varies by viscosity, with a maximum of ±2.5%.
Operating temperature: -30 to +120°C depending on the model and application.
Operating pressure: Up to 200 bar.
Protection class: IP 54.
Ex-marking: II 2 G Ex c TX.

Digital Display Unit FLUXTRONIC®:

Features a simple operating concept with data retention on battery replacement.
Four safety levels with PIN settings and three additional outlets.
Calibration on medium possible and supports batch mode with a switching amplifier.
Ex-proofed with a protection class of IP 54.

Mounting and Installation:

Ensure the flow meter is mounted without the weight of the oval rotors affecting the housing.
Various mounting positions are possible, with specific considerations for pressure drop and viscosity.

Additional Components:

Switching amplifiers for both Ex and non-Ex applications.
Connecting cables and protective caps available for integration with FLUXTRONIC®.

Catalog excerpts

Flow meter FMO Flow meter FMO Advantages/characteristics: ► Oval rotor design ► For low-viscosity to high-viscosity media ► With integrated digital display unit FLUXTRONIC® or available as pulse version ► Depending on type for use with drum/eccentric worm-drive pump or for use in piping ► Flow rate of 0,04 - 380 l/min ► High accuracy and repeat accuracy ► Signal transduction at FLUXTRONIC® or other external control e. g. PCC possible ► Display in litre, gallon or kilogram possible ► Semiautomatic filling in connection with a switching amplifier possible ► For Ex-application in zone 1 (' Difference between the average measured values of a series of the measurements and the theoretical value (2 Bandwidth between several measurements under identical conditions * Version Reed/Reed or Hall/Hall possible

Open the catalog to page 1

Technical data/type Difference between the average measured values of a series of the measurements and the theoretical value Bandwidth between several measurements under identical conditions Version Reed/Reed or Hall/Hall possible

Open the catalog to page 2

FMO 104/110 in pulse version (without FLUXTRONIC®)

Open the catalog to page 3

Flow meter with FLUXTRONIC®

Open the catalog to page 4

Technical data Control cable 5 m Flow meter/FSV Control cable 10 m Flow meter/FSV e. g. for switching the motor and valve

Open the catalog to page 5

Mounting position FMO When mounting the flow meter type FMO make sure that neither the bottom nor the cover of the meter housing will be ground off by the weight of the oval rotors. FLUX-GERATE GMBH Talweg 12 ■ D-75433 Maulbronn Tel +49 (0)7043 101-0 ■ Fax +49 (0)7043 101-444 [email protected] ■ www.flux-pumps.com

Open the catalog to page 6

FLUX Flow meter FMO 110

FLUX Flow meter FMO 110

Catalog excerpts

All FLUX-GERÄTE GMBH catalogs and technical brochures

Archived catalogs