*mydirectindustry

Catalogs
FLUX-GERÄTE GMBH
FLUX Flow meter FMO 104

FLUX Flow meter FMO 104

Product catalog summary

Overview: The document provides a comprehensive technical data sheet for the Flow Meter FMO, highlighting its design, specifications, and applications. It includes details on various models, their materials, operational parameters, and additional components like the digital display unit FLUXTRONIC®.

Advantages/Characteristics:

Oval rotor design suitable for a range of viscosities.
Integrated digital display unit FLUXTRONIC® or available as a pulse version.
Applicable for use with drum/eccentric worm-drive pumps or in piping systems.
Flow rate capacity ranges from 0.04 to 380 l/min with high accuracy and repeatability.
Supports signal transduction with FLUXTRONIC® or external controls.
Display options include liters, gallons, or kilograms.
Semiautomatic filling capability with a switching amplifier.
Ex-application suitability in zone 1.

Technical Specifications:

Models: FMO 101, 102, 104, 110, 140, 150 with varying materials and connections.
Materials: Housing options include PVDF, AL, and S; rotors made of PPS, S, or LCP.
Viscosity range: Up to 500,000 mPas.
Flow rate and measurement error vary by model and viscosity.
Temperature range: -30°C to +120°C depending on application type.
Operating pressure: Up to 200 bar.
Protection class: IP 54 with Ex-marking II 2 G Ex c TX.

Digital Display Unit FLUXTRONIC®:

Features a simple operating concept with data retention on battery replacement.
Includes four safety levels with PIN settings and three additional outlets.
Calibration on medium possible and supports batch mode with a switching amplifier.
Ex-proofed with ambient temperature range of -20 to +40°C.

Mounting and Installation:

Ensure proper mounting to avoid damage from rotor weight.
Flow meters can be mounted in any orientation with specific pressure drop considerations for different viscosities.

Additional Components:

Switching amplifiers available for both Ex and non-Ex applications.
Various connecting cables and protective accessories are listed with part numbers.

Catalog excerpts

Flow meter FMO Flow meter FMO Advantages/characteristics: ► Oval rotor design ► For low-viscosity to high-viscosity media ► With integrated digital display unit FLUXTRONIC® or available as pulse version ► Depending on type for use with drum/eccentric worm-drive pump or for use in piping ► Flow rate of 0,04 - 380 l/min ► High accuracy and repeat accuracy ► Signal transduction at FLUXTRONIC® or other external control e. g. PCC possible ► Display in litre, gallon or kilogram possible ► Semiautomatic filling in connection with a switching amplifier possible ► For Ex-application in zone 1 (' Difference between the average measured values of a series of the measurements and the theoretical value (2 Bandwidth between several measurements under identical conditions * Version Reed/Reed or Hall/Hall possible

Open the catalog to page 1

Technical data/type Difference between the average measured values of a series of the measurements and the theoretical value Bandwidth between several measurements under identical conditions Version Reed/Reed or Hall/Hall possible

Open the catalog to page 2

FMO 104/110 in pulse version (without FLUXTRONIC®)

Open the catalog to page 3

Flow meter with FLUXTRONIC®

Open the catalog to page 4

Technical data Control cable 5 m Flow meter/FSV Control cable 10 m Flow meter/FSV e. g. for switching the motor and valve

Open the catalog to page 5

Mounting position FMO When mounting the flow meter type FMO make sure that neither the bottom nor the cover of the meter housing will be ground off by the weight of the oval rotors. FLUX-GERATE GMBH Talweg 12 ■ D-75433 Maulbronn Tel +49 (0)7043 101-0 ■ Fax +49 (0)7043 101-444 [email protected] ■ www.flux-pumps.com

Open the catalog to page 6

FLUX Flow meter FMO 104

FLUX Flow meter FMO 104

Catalog excerpts

All FLUX-GERÄTE GMBH catalogs and technical brochures

Archived catalogs