*mydirectindustry

Catalogs
FLUX-GERÄTE GMBH
FLUX Flow meter FMO 102

FLUX Flow meter FMO 102

Product catalog summary

Overview: The document provides a detailed technical data sheet for the Flow Meter FMO, highlighting its design, specifications, and applications. It is suitable for various viscosities and can be used with different pump types or in piping systems.

Key Features:

Oval rotor design suitable for low to high-viscosity media.
Integrated digital display unit FLUXTRONIC® or available as a pulse version.
Flow rate range: 0.04 - 380 l/min with high accuracy and repeatability.
Display options in liters, gallons, or kilograms.
Ex-application suitability in zone 1.

Technical Specifications:

Various models (FMO 101, 102, 104, 110, 140, 150) with different materials and connection types.
Viscosity handling up to 500,000 mPas.
Measurement error varies with viscosity, with repeat accuracy at ±0.03%.
Operating temperature ranges from -30°C to +120°C depending on the model and application.
Maximum operating pressure up to 200 bar.
Protection class IP 54 and Ex-marking II 2 G Ex c TX.

Digital Display Unit FLUXTRONIC®:

Simple operation with data retention on battery replacement.
Four safety levels with PIN settings and additional outlets.
Calibration on medium possible and Ex-proofed.

Mounting and Installation:

Ensure proper mounting to avoid damage from rotor weight.
Various mounting positions and pressure drop considerations for different viscosities.

Accessories and Part Numbers:

Includes part numbers for different configurations and materials.
Connecting pieces available for various pump connections.

Catalog excerpts

Flow meter FMO Flow meter FMO Advantages/characteristics: ► Oval rotor design ► For low-viscosity to high-viscosity media ► With integrated digital display unit FLUXTRONIC® or available as pulse version ► Depending on type for use with drum/eccentric worm-drive pump or for use in piping ► Flow rate of 0,04 - 380 l/min ► High accuracy and repeat accuracy ► Signal transduction at FLUXTRONIC® or other external control e. g. PCC possible ► Display in litre, gallon or kilogram possible ► Semiautomatic filling in connection with a switching amplifier possible ► For Ex-application in zone 1 (' Difference between the average measured values of a series of the measurements and the theoretical value (2 Bandwidth between several measurements under identical conditions * Version Reed/Reed or Hall/Hall possible

Open the catalog to page 1

Technical data/type Difference between the average measured values of a series of the measurements and the theoretical value Bandwidth between several measurements under identical conditions Version Reed/Reed or Hall/Hall possible

Open the catalog to page 2

FMO 104/110 in pulse version (without FLUXTRONIC®)

Open the catalog to page 3

Flow meter with FLUXTRONIC®

Open the catalog to page 4

Technical data Control cable 5 m Flow meter/FSV Control cable 10 m Flow meter/FSV e. g. for switching the motor and valve

Open the catalog to page 5

Mounting position FMO When mounting the flow meter type FMO make sure that neither the bottom nor the cover of the meter housing will be ground off by the weight of the oval rotors. FLUX-GERATE GMBH Talweg 12 ■ D-75433 Maulbronn Tel +49 (0)7043 101-0 ■ Fax +49 (0)7043 101-444 [email protected] ■ www.flux-pumps.com

Open the catalog to page 6

FLUX Flow meter FMO 102

FLUX Flow meter FMO 102

Catalog excerpts

All FLUX-GERÄTE GMBH catalogs and technical brochures

Archived catalogs