Catalogs >
FLUX-GERÄTE GMBH >
Eccentric worm-drive pumps F 550 TR and F 560 TR FOOD

Eccentric worm-drive pumps F 550 TR and F 560 TR FOOD
6Pages

Catalog excerpts

Eccentric worm-drive pumps F 550 TR and F 560 TR FOOD - 1

Technical data sheet Eccentric worm-drive pumps F 550 TR and F 560 TR FOOD with clamp on the bearing flange Eccentric worm-drive pumps F 550 TR and F 560 TR FOOD with clamp on the bearing flange Advantages/features: ► For use with VISCOFLUX mobile S and VISCOFLUX ► Also suitable for horizontal installation ► For transferring especially high-viscosity media ► With clamp on bearing flange ► No twisting open of the connection between pump and motor under the action of extreme forces and therefore no leaks ► Easy and fast disassembly ► All parts contacting media can be cleaned, disinfected or sterilised ► Drive with three-phase motors or compressed air motors ► F 550 for industrial use ► F 560 FOOD suitablefor contact with foods complying with EG 1935/2004 and FDA CFR 21 Motors (not scope of supply) | Three-phase / compressed

Open the catalog to page 1

Eccentric worm-drive pumps F 550 TR and F 560 TR FOOD - 2

Clamp connection between bearing flange and outer tube Clamp connection between Clamp connection between eccentric outer tube and stator worm-drive pump and follower plate Dimensions: Eccentric worm-drive pump F 550 TR Installation dimension 550 TR With clamp on bearing flange

Open the catalog to page 2

Eccentric worm-drive pumps F 550 TR and F 560 TR FOOD - 3

Clamp connection between bearing flange and centring flange, centring flange and outer tube Individual parts of upper area: bearing flange, shaft, centring flange, mechanical seal, hinged clamp (2x) and outer tube Individual parts of lower area: hinged clamp, stator housing, stator and eccentric worm Dimensions: Eccentric worm-drive pump F 560 TR FOOD Installation dimension VISCOFLUX mobile S with an F 560 TR with a clamp on the bearing flange for transferring high-viscosity pasty media

Open the catalog to page 3

Eccentric worm-drive pumps F 550 TR and F 560 TR FOOD - 4

Performance diagrams1’Eccentric worm-drive pumps F 550 TR and F 560 TR FOODPerformance diagram: Pump type Performance diagram: Eccentric worm-drive pump F 560 TR FOOD Pump type Three-phase motors for use with eccentric worm-drive pumps: Viscosity up to 25,000 mPas: 0.75 kW at a speed of 930 rpm. Viscosity from 50,000 mPas: 1.1 kW at a speed of 700 rpm (caused by the lower flow speed of the transferred medium) At higher viscosity levels, the delivery quantity decreases corresponding to the flow speed of the medium. Measured values ± 10 % at 930 rpm. The delivery quantity is dependent on the...

Open the catalog to page 4