Drum emptying system VISCOFLUX lite data sheet

Product catalog summary

Overview:
The VISCOFLUX lite is designed for transferring higher-viscosity media that are just capable of flowing. It is suitable for drums with an inner diameter of 571.5 mm and ensures less than 1% residue remains in the drum. The system is compact, mobile, and easy to assemble, consisting of a pump centring plate and a follower plate with a process seal. It is compatible with FLUX eccentric worm-drive pumps and is available in a version for hazardous areas (zone 0/1).

Specifications:

Drum Compatibility: 200 L, ISO drums with lid, inner Ø: 571.5 mm.
Components: Includes pump centring plate and follower plate with process seal.
Ex-marking for hazardous areas: II 1 G IIB TX.
Air-connection: Quick coupling type 26 (6-8 bar).
Materials: Various materials used for different components, including PE, stainless steel, and conductive materials.
Weight: Pump centring plate approx. 6.5 kg; Follower plate with process seal approx. 13 kg.
Delivery Rate: Max 50 l/min for standard version, 30 l/min for Ex version.
Immersion Length: 1000 mm.

Components and Accessories:

Recommended Pumps: Eccentric worm-drive pumps type F 550 with specific outer diameters and materials.
Process Seals: Available in NBR white, NBR black, FKM black, and conductive versions.
Compatible Motors: Various motor versions with different power ratings and gear ratios.
Necessary Accessories for Ex Version: Earth ground wire with grounding clamp.

Dimensional Information:

System Height Assembled: Approx. 1500 mm.
Required Room Height for Erection: Approx. 2200 mm, without motor.

Contact Information:
For further inquiries, contact FLUX-GERÄTE GMBH at Talweg 12, D-75433 Maulbronn, Tel +49 (0)7043 101-0, Fax +49 (0)7043 101-444, or visit www.flux-pumpen.de.

Catalog excerpts

Drum emptying system VISCOFLUX lite data sheet-1

VISCOFLUX lite VISCOFLUX lite Advantages / Characteristics ► For transfer of higher-viscosity media which are just capable of flowing ► For drums with an inner diameter of 571.5 mm ► Less than 1 % residue in the drum ► Consisting of pump centring plate, follower plate with process seal ► Requires little space ► Mobile for easy transport to the drum ► Easy to assemble due to only a few components ► Follower plate for air-tight sealing of the medium ► For the use with FLUX eccentric worm-drive pumps ► Version available for the use in hazardous areas zone 0/1

Open the catalog to page 1

Drum emptying system VISCOFLUX lite data sheet-2

Dimensions VISCOFLUX lite Equipotential bonding 1. Pump centring plate 2. Follower plate with process seal Ex version with equipotential bonding Pump centring plate Ex version with equipotential bonding System dimensions Required room height for erection: approx. 2200 mm, without motor System height assembled (dependent on pump version and motor)

Open the catalog to page 2

Drum emptying system VISCOFLUX lite data sheet-3

Other pump versions, motors and accessories on request

Open the catalog to page 3

Drum emptying system VISCOFLUX lite data sheet-4

VISCOFLUX lite Ex Description Recommended pumps for VISCOFLUX lite Ex Eccentric worm-drive pumps type F 550, with outer diameter 50 mm in stainless steel, with G 1 A A discharge connection, open mechanical seal, seal material FKM, torsion shaft, immersion length 1000 mm, incl. stator (PTFE black) and stator housing (without hose connection) Other pump versions, motors and accessories on request

Open the catalog to page 4