Catalogs >
FLUX-GERÄTE GMBH >
Centrifugal immersion pumps

Centrifugal immersion pumps
46Pages

Add to favorites

Catalog excerpts

Centrifugal Immersion Pumps

Open the catalog to page 1

FLUX Centrifugal Immersion Pumps – Quality that sets standards. Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process evaluation by our research and development department. They are a true FLUX product, from conception through to manufacture, assembly and testing. Their design philosophy, and the materials selected for their construction make them ideal for applications in the chemical industry, surface treatment, electroplating, printed circuit manufacturing, water treatment and wastewater treatment. FLUX centrifugal immersion pumps...

Open the catalog to page 2

Save, powerful, reliable – The new FLUX range With 4 diﬀerent design formats within the vertical centrifugal immersion pump range FLUX oﬀer a cost eﬀective, reliable solution for many liquid transfer and circulating operations. With these pumps FLUX meet the requirements of the market with their forward-looking designs and the manufacture of high quality products. Type F 620 and F 640: with mechanical seal in vertical and horizontal version Type F 706: 4 diﬀerent sizes, sealles design with sleeve bearing, immersion length up to 2000 mm Type F 726: very robust construction with shaft bearing...

Open the catalog to page 4

Table of contents Introduction 2-3 Table of contents FLUX Centrifugal Immersion Pumps F 620 S 4-5 size 15 and 30 in stainless steel for delivery rates of up to 23 m3/h FLUX Centrifugal Immersion Pumps F 640 PP 6-7 size 15, 30, 15 Z and 30 Z in polypropylene for delivery rates of up to 34 m3/h FLUX Centrifugal Immersion Pumps F 640 PP and F 640 PVDF 8-9 size 185 and 230 in polypropylene or polyvinylidenfluoride for delivery rates of up to 42 m3/h FLUX Centrifugal Immersion Pumps F 620 S TR and F 640 PP TR 10-11 for dry installation for horizontal use for delivery rates of up to 44...

Open the catalog to page 5

FLUX Centrifugal Immersion Pump F 620 S in stainless steel Size 15 and 30 Typical Applications Transferring low ﬂammability liquids up to a viscosity of 2500 mPas (cP) from containers or tanks, either open topped or closed. Suitable for stationary or portable applications. Construction features Centrifugal pump in stainless steel consisting of an inner tube and outer tube. The centrifugal impeller in the pump housing is driven by the motor via the drive shaft. The drive shaft is supported by intermediate bearings within the inner tube, a mechanical seal separates the liquid from the...

Open the catalog to page 6

Technical data Performance chart FLUX F 620 S-15 and F 620 S-30 Measured values ± 10% determined with water (20 °C). Nominal speed n = 2850 rpm In determining the absorbed kW of the motor, multiply the absorbed kW shown in the above diagram with the speciﬁc gravity of the liquid to be pumped.

Open the catalog to page 7

Technical data Dimensions F 620 S-15 and F 620 S-30 Three-phase motor: dimension X, Ø Y and Z see page 22 Minimum liquid level when starting the pump. Also valid for variant 1. Variant 1 with suction strainer dimension e + 28 mm Basic model dimension e max. 3000 mm

Open the catalog to page 8

Centrifugal Immersion Pump F 620 SCentrifugal Immersion Pump F 620 S in stainless steel, thread on outlet G 1V2 A, without drive motor Type/Size Scope of supply A complete vertical centrifugal immersion pump consists of: drive motor, pump and necessary accessories. Weight per pump: 15 - 45 kg depending on the pump size, immersion length and motor kW.

Open the catalog to page 9

FLUX Centrifugal Immersion Pump F 640 PP in polypropylene Size 15, 30, 15 Z and 30 Z Typical Applications Transferring low ﬂammability liquids up to a viscosity of 2500 mPas (cP) from containers, tanks, either open topped or closed. Transferring corrosive liquids in chemical processing and engineering, metal-working and electroplating together with water treatment and waste water treatment. Suitable for stationary or portable application. Construction features Vertical centrifugal immersion pump in polypropylene consisting of an inner tube and outer tube. The centrifugal impeller in the...

Open the catalog to page 10

Technical data Performance chart F 640 PP-15, F 640 PP-30, F 640 PP-15 Z and F 640 PP-30 Z Measured values ± 10% determined with water (20 °C). Nominal speed n = 2850 rpm In determining the absorbed kW of the motor, multiply the absorbed kW shown in the above diagram with the speciﬁc gravity of the liquid to be pumped.

Open the catalog to page 11

Technical data Dimensions F 640 PP-15, F 640 PP-30, F 640 PP-15 Z and F 640 PP-30 Z Three-phase motor: dimension X, Ø Y and Z see page 22 Minimum liquid level when starting the pump. Also valid for variant 1. Variant 1 with suction strainer dimension e + 38 mm Basic model dimension e max. 4100 mm

Open the catalog to page 12

Centrifugal Immersion Pump F 640 PPCentrifugal Immersion Pump F 640 PP in polypropylene, thread on outlet G 2% A, without drive motor Type/Size Scope of supply A complete vertical centrifugal immersion pump consists of: drive motor, pump and necessary accessories. Weight per pump: 15 - 60 kg depending on the pump size, immersion length and motor kW.

Open the catalog to page 13

FLUX Centrifugal Immersion Pump F 640 PP and F 640 PVDF Size 185 and 230 Typical applications Transferring low ﬂammability liquids up to a viscosity of 2500 mPas (cP) from containers, tanks, either open topped or closed. Transferring corrosive liquids in chemical processing and engineering, metal-working and electroplating together with water treatment and waste water treatment. Suitable for stationary or portable application. Construction features Vertical centrifugal immersion pump for stationary application. The centrifugal impeller in the pump housing is driven by the motor via the...

Open the catalog to page 14

Technical data Performance chart F 640 PP-185 and F 640 PVDF-185 Measured values ± 10% determined with water (20 °C). Nominal speed n = 2850 rpm In order to achieve the desired output, centrifugal impellers in diameters of 100 to 160 mm are available. In determining the absorbed kW of the motor, multiply the absorbed kW shown in the above diagram with the speciﬁc gravity of the liquid to be pumped.

Open the catalog to page 15

Technical data Dimensions F 640 PP-185 and F 640 PVDF-185 Three-phase motor: dimension X, Ø Y and Z see page 22 Minimum liquid level when starting the pump. Also valid for variant 1. Variant 1 with suction strainer dimension e + 90 mm Basic model dimension e max. 4100 mm Three-phase motor: dimension X, Ø Y and Z see page 22 Variant 1 with suction strainer dimension e + 90 mm Minimum liquid level when starting the pump. Also valid for variant 1. Basic model dimension e max. 4100 mm 8.

Open the catalog to page 16