Air-operated diaphragm pumps Type FDM More than just pumps

FLUX air-operated diaphragm pumps Type FDM – genuine allrounders FLUX air-operated diaphragm pumps are genuine Special features: allrounders for the safe reliable and careful (no FLUX air-operated diaphragm pumps have several shearing) transfer of thin to high viscosity products, even with solids in suspension, as well as abrasive, – Pressures up to 8 bar (20 bar on 3:1 ratio pump) highly flammable or aerated liquids. Each pump – Self priming, even from a dry start model is available in different versions because of – Variable delivery rates by adjusting air pressure a great variety of possible...

Fluid chamber Ball valve Valve seat Silencer Discharge side Piston valve Air inlet Air-operated diaphragm pumps size ³∕ 8“, Type FDM 10 Air-operated diaphragm pumps size ½“, Type FDM 12 Air-operated diaphragm pumps size 1“, Type FDM 25 Air-operated diaphragm pumps size 1½“, Type FDM 40 Air-operated diaphragm pumps size 2“, Type FDM 50 Air-operated diaphragm pumps size 3“, Type FDM 80 High-pressure diaphragm pump size 1“, Type FDMH 25 Accessories The great range of FLUX pumps Suction side Air chamber Diaph

Polypropylene (PP) suitable for corrosive liquids, acids and alkalis as well as neutral liquids. Liquid examples: formic acid, ammonia, boracic acid, chromic acid (up to 10 %), fertilizer, acetic acid, hydrofluoric acid (up to 70 %), fruit acid, caustic potash, copper chloride, lactic acid, caustic soda, phosphoric acid, hydrochloric acid, sulphuric acid (up to 80 %), distilled water. Aluminium Alloy AlMg5 (AL) suitable for neutral and/or flammable liquids. Liquid examples: alcohol, gasohol, drilling fluid, diesel, glycol, fuel, hydraulic fluid, solvent, soap (fluid), wax (liquid), water. Polyvinylidene...

FLUX air-operated diaphragm pump FDM 07 in non-metallic version, ¼“ Dimensions [mm] air outlet 1/4“ NPTF discharge side female thread G ¼“ / ¼“ NPTF Hybrid male thread ¾“ NPTF suction side female thread G ¼“ / ¼“ NPTF Hybrid male thread ¾“ NPTF Technical Data FDM 07 Delivery rate max. Connection suction side & discharge side Male thread (Hybrid) Female thread Delivery rate Q [L/min] Values ± 10 % with water at 20 °C * depending on pump model, operating pressure and fluid Pump housing Acetal conductive Air-motor body Polypropylene Electrically conductive for use in hazardous areas ac

FLUX air-operated diaphragm pump FDM 10 in non-metallic version, ³∕8“ Connection pump Suction side Discharge side Delivery rate Values ± 10 % with water at 20 °C *Dry exhaust up to 2,6 m, **with silencer Pump housing Acetal conductive Polyvinylidene Fluoride Air-motor body Polypropylene Electrically conductive for use in hazardous areas according to ATEX-Directi

FLUX air-operated diaphragm pump FDM 12 in non-metallic version, ½“ Connection pump Suction side Discharge side Values ± 10 % with water at 20 °C *Dry exhaust up to 3 m, **with silencer Pump housing Polyvinylidene Fluoride Acetal conductive Stainless Steel Stainless Steel Air-motor body Polypropylene Electrically conductive for use in hazardous areas according to ATEX-Directiv

FLUX air-operated diaphragm pump FDM 12 in metallic version, ½“ Electrically conductive for use in hazardous areas according to ATEX-Directive 2014/34/EU. FDM 12 S Dimensional drawing on request. FDM 12 AL Connection pump Suction side Discharge side Delivery rate Values ± 10 % with water at 20 °C *Dry exhaust up to 3 m, **with silencer Pump housing Stainless Steel Stainless Steel

FLUX air-operated diaphragm pump FDM 25 in non-metallic version, 1“ Suction head* Discharge side*** Connection pump Suction side*** Delivery rate Values ± 10 % with water at 20 °C *Dry exhaust up to 4,5 m, **with silencer ***connecting dimensions for DN 25, DN 6 appropriate Pump housing Polyvinylidene Fluoride

FLUX air-operated diaphragm pump FDM 25 in metallic version, 1“ Electrically conductive for use in hazardous areas according to ATEX-Directive 2014/34/EU. Discharge side Connection pump Suction side Values ± 10 % with water at 20 °C *Dry exhaust up to 6,0 m, **with silencer Pump housing Stainless Steel Stainless Steel

FLUX high pressure air diaphragm pump FDMH 25 in metallic version, operating pressure up to max. 20 bar – ratio 3:1 Electrically conductive for use in hazardous areas according to ATEX-Directive 2014/34/EU. Dimensional drawing upon request. Illustration similar Technical Data FDMH 25 Connection pump Suction side Discharge side Delivery rate Values ± 10 % with water at 20 °C *With silencer Pump housing Stainless Steel Stainless Steel Stainless Steel Air-motor body Aluminium Application examples: – – – – Colour agitation Conveyance of fluids with a high viscosity through pipings with thereby resulting...

FLUX air-operated diaphragm pump FDM 40 in non-metallic version, 1½“ Connection pump Suction side*** Discharge side*** Values ± 10 % with water at 20 °C *Dry exhaust up to 4,2 m, **with silencer ***connecting dimensions for DN 25, DN 6 appropriate Pump housing Polyvinylidene Fluoride

FLUX air-operated diaphragm pump FDM 40 in metallic version, 1½“ Electrically conductive for use in hazardous areas according to ATEX-Directive 2014/34/EU. Dimensional drawing upon request. Illustration similar Discharge side Connection pump Suction side Delivery rate Values ± 10 % with water at 20 °C *Dry exhaust up to 6,0 m, **with silencer Pump housing Stainless Steel Stainless Steel Gray Cast Iron

FLUX air-operated diaphragm pump FDM 50 in non-metallic version, 2“ Discharge side*** Connection pump Suction side*** Delivery rate Values ± 10 % with water at 20 °C *Dry exhaust up to 4,0 m, **with silencer ***connecting dimensions for DN 25, DN 6 appropriate Pump housing Polyvinylidene Fluoride