FLURO-Gelenklager GmbH ROD ENDS AND SPHERICAL PLAIN BEARINGS FOR MOTOR SPORT

Introduction The FLURO ® production program consists of Rod Ends to DIN ISO 12240 - 4 and Spherical Plain Bearings to DIN ISO 12240 - 1, Series K and E. Stainless steel, maintenance free and versions with lubrication fittings are available. Where bearings with standard dimensions cannot be used, parts to customer designs are manufactured. Since many years the FLURO ® products have achieved a reputation of high quality and durability. Therefore the demand within the industrial application market continuously increased. Market observation and customer requests initiated the development and design...

Production Program, Technical Data 4 Technical Data Technical Information 6 Specials Precision Parts Martin Hohn GmbH 9 Motor Sport Rod Ends Series K GIXSW..MS MS-Version, female thread, Maintenance Free 10 GAXSW..MS MS-Version, male thread, Maintenance Free 11 Motor Sport Spherical Plain Bearings Series K GXSW..MS MS-Version, smaller outside diameter, Maintenance Free 12 GXOW..MS MS-Version, larger outside diameter, Maintenance Free 13 Motor Sport Spherical Plain Bearings Series E GE..EC-NIRO MS MS-Version, Maintenance Free, Stainless Steel 14 Spherical Plain Bearings Series K GXO..ICR(RR) Extra...

Rod Ends DIN ISO 12240-4 Series K - Motor Sport Spherical Plain Bearings DIN ISO 12240-1 Series K - Motor Sport Spherical Plain Bearings DIN ISO 12240-1 Series K - Extra Heavy Duty Spherical Plain Bearings DIN ISO 12240-1 Series E - Motor Sport Preloaded bearing fit An internal play with 'zero' tolerance is achieved through a preloaded bearing. Under normal permissible conditions and usage a minimal settlement of the bearing components or a minimal tolerance increase at the mating surface will take place. This special bearing technology causes a considerably higher bearing life with continuous...

Applications The Motor Sport application has its own demand on product and technique. The required task is to create a product which combines high performance and an appealing sporty design. Animated through customers and in close contact with technicians and university development teams FLURO® developed this MS series. For the below mentioned applications the technical geometric design in connection with the performance of the bearing becomes important. A special emphasis has to be laid on the bearing's composition of inner ring, insert, mating surface and housing. A classic application for...

Bearing Load ratings Bearing Load ratings are bearing specific data, derived from the characteristics of the materials used. They are used when selecting Spherical Plain Bearings or Rod Ends for a particular load, but may have to be reduced in adverse operating conditions. For Spherical Plain Bearings Co indicates the radial load, which does not deform the mating surface permanently. Precondition is the stable configuration of the housing. Torque: Because the bearing has 'no play', the internal clearance (torque) of the MS parts can be only defined by the force with which the ball can be moved....

Due to the use of special materials, FLURO® is able to design high performance bearings, which can operate within a temperature range of minus 50° to plus 720° Celsius / minus 58° to plus 1328° Fahrenheit. This high performance bearing can be used in the area of turbo chargers or exhaust return mechanisms. In the area of very aggressive substances such as sand, salt and dust these bearings are highly recommended. They are also very resistant against vibration. Temperature range for FLURO® rod ends

Recommended fits for the bore housings to incorporate Spherical Plain Bearings The bore diameter of the ball of Spherical Plain Bearings, Series K is tolerated to H7. For Series E (MS) please refer to each product page. Installation instructions: Attention: No tolerance or play can be allowed for the shaft when incorporated in the Ball or the Outer Ring when incorporated in a housing. Through this it is guaranteed that the glide movement arises on the nodular gliding surface only. When mounting extra precaution has to be taken that the press force does not damage the bearing. The press force...

Precision Parts Höhn Precision Parts - this name represents quality production. Thirty years of experience guarantee the companies reliable capability. The continuously modernized machine park enables a flexible and economic production of turned and machined parts. Variety for Höhn does mean that besides the turning, machining and grinding of parts, also complete components and assemblies are manufactured. In agreement with the TÜV Southwest, Höhn received stamp authorization for continued re-stamping of material specification 3.1.B. since 1981. Höhn achieved also the DIN EN ISO 9001:2000 certification....

Series GIXSW..MS Rod Ends with female thread made from heat-treated steel, nickel plated with PTFE-liner, maintenance free. Preloaded bearing For use at highest dynamic pressure and tension loads in corrosive environments Housing: Heat-treated steel to 42CrMo4, Aisi 4140, forged, nickel plated with high polish finish. Insert: Stainless steel to 1.4571, Aisi 316Ti with PTFE liner bonded to the inner surface Ball: Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated on the running surface Clearance: preloaded, zero tolerance On request: - with left hand thread - Rod...

Series GAXSW..MS Rod Ends with male thread made from heat-treated steel, nickel plated with PTFE-liner, maintenance free. Preloaded bearing For use at highest dynamic pressure and tension loads in corrosive environments Housing: Heat-treated steel to 42CrMo4, Aisi 4140, forged, polished, nickel plated with high polish finish Insert: Stainless steel to 1.4571, Aisi 316Ti with PTFE liner bonded to the inner surface Ball: Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated on the running surface Clearance: preloaded, zero tolerance On request: with left hand thread,...