Oven Tracker® Thermocouple Range 1 A comprehensive range to suit your exact application needs • Designed to be accurate, repeatable and easy to operate • Exceptionally durable, quad wrapped, 10 strand 36 AWG (0.125 mm/0.005 in), metal braid and PTFE sheathed* Type K thermocouple • Specified to ANSI MC96.I Special Limits of Error (±0.4% or ±1.1°C/±2.0°F, whichever is greater) • IEC584 color standard (green) for Type K thermocouples • Strong ‘crimped' plug/cable attachment • Circular cable cross section to reduce kinking and twisting • Various cable lengths available MICROMAG THERMOCOUPLES Employing state of art Samarium Cobalt magnet technology, these miniature surface and air thermocouples allow placement into the tightest of recesses. Ideal for car body shell areas that are difficult to access. Benefiting from a low thermal mass, response characteristics challenge those of exposed junction thermocouples with the benefit of quick and easy attachment to ferrous substrates. Despite its size, 17 mm (0.7 in) diameter, the magnet strength guarantees secure attachment up to the maximum experienced paint and powder coating cure temperatures. Encapsulated magnet design allowing reliable direct use even on wet painted and E-coated substrates. No risk of either magnet damage or magnet loss when the probe is removed from cured paint surface at the end of the oven process. Supplied with aluminum knob for easy routine rugged handling. Removable, if necessary, to suit application requirements. MicroMag Surface PA0973 1.5 m (5 ft) Maximum temperature 265°C (509°F) PA09756.0 m (20 ft) Maximum temperature 265°C (509°F) MicroMag Air PA09951.5 m (5 ft)Maximum temperature 265°C (509°F) PA09963.0 m (10 ft) Maximum temperature 265°C (509°F) IRMAG SURFACE THERMOCOUPLE Magnetic thermocouple designed to measure ferrous substrates in IR cure ovens. Combines easy attachment and fast thermocouple response. Ideal for automotive IR repair operations. Robust alternative to Adhesive Patch thermocouple. PAI36I 1.5 m (5 ft) Maximum temperature:

MAGNETIC THERMOCOUPLES Magnet offset from sensor to prevent heatsink effect and PTFE coated to prevent sticking (Recommended for E-coat applications). PTFE handle for quick, safe and easy removal or repositioning. Chamfered thermocouple head and metal tension arm designed to provide repeatable contact between sensor and product. Surface PA0053 1.5 m (5 ft) Maximum temperature 265°C (509°F) Air Attach to ferrous components for measuring the surrounding ambient air temperature. PA0055 1.5 m (5 ft) Maximum temperature 265°C (509°F) ALUCLAMP SURFACE THERMOCOUPLE...