ScanIR Thermal Imaging System 3 Linescanning Infrared Thermometer and ® Courtesy of Stahl-Zentrum, Germany Courtesy of Stahl-Zentrum, Germany

600 to 1200°C (1112 to 2192°F) 1.0|J Hot strip mills, plate mills and continuous casting 400 to 950°C (752 to 1742°F) 1.6|J Galvanizing lines, Non ferrous metal hot strips, continuous casting 20 to 350°C (68 to 662°F) 3-5|j Printing, coating, laminating, food, drying/curing, thermoforming, textiles, plaster board, paint curing, carpeting, and flooring 100 to 650°C (212 to 1202°F) 3.5-4.0|j Kiln shell temperatures, hot clinkers, hot spot detection on conveyor belts Extrusion and converting Extrusion and converting of polyethylene, of polyethylene, polypropylene and polypropylene and polystyrene...

Imaging Real-time thermal imaging is provided by ScanView™ Pro software for temperature monitoring, display and analysis. With ScanView Pro software, you can quickly detect a hot spot or non-uniformity before it becomes a problem. The ScanView Pro software provides features to subdivide thermal images from the ScanIR3 linescanner into portions of specific interest. Temperatures in each portion can be processed for certain math functions, like average, maximum or minimum temperatures. In case of a thermal defect, the software triggers an alarm. Edge-to-edge Temperature Measurement Unlike point...

Series Cable Length Range (measured at focal point) S310 600-1200°C (1112-2192°F) 1.0pm D/200 Hot strip mills, plate mills and continuous casting S320 400-950°C (752-1742°F) 1.6pm D/200 Galvanizing lines, non ferrous metal hot strips, continuous casting S330 20-350°C (68-662°F) 3-5pm D/170 Printing, coating, laminating, food, drying/curing, thermoforming textiles, plaster board, paint curing, carpeting and flooring S335 100-650°C (212-1202°F) 3.5-4.0pm D/170 Kiln shell temperatures, hot clinkers, hot spot detection on conveyor belts S343 30-250°C...