Catalogs >
Fluke Process Instruments >
Endurance Datasheet 2024

Endurance Datasheet 2024
3Pages

Catalog excerpts

Endurance® Fiber-Optic Datasheet Highlights • Rugged non-contact fiber-optic pyrometer measurement systems • 4 year warranty • Wide temperature range: 250 to 3200 °C (482 to 5792 °F) • Multiple fixed focus lens options for different mounting distances • Sighting options: Laser aiming • Superior optical resolution to 100:1 • LAN/Ethernet interface with PoE for communication with the sensor (ASCII and Webserver) • Profinet interface option • Programmable relay output • Fail safe alarm • Isolated analog input/output • Rugged electronics box housing, IP65 (NEMA-4) rated • Endurance software for remote configuration, remote monitoring and field calibration • Single color and two colors models Electrical Specifications Inputs Contact input (peak/valley reset, laser), Analog input 0/4-20mA (emissivity, e-slope, background temperature) Ethernet, Profinet, 0/4-20 mA, max. load: 500 Ω*, RS485 2/4 wire half duplex, networkable relay, 48 V, 300 mA Power Supply 20 to 48 VDC, 500 mA Power over Ethernet (PoE) General Specifications Fiber Optic Cable 6.5 (.25) 0 to 200 °C (32 to 392 °F); standard temperature rating 0 to 315ºC (32 to 600ºF); high temperature option Cable Protection Rated up to 200 ºC (392 ºF); stainless steel armor; PTFE coating, rubber “boot”, and IP65 (IEC529) NEMA-4 (not available on high temperature cable); provision for conduit to protect fiber cable Vibration Electronics housing IEC 68-2-6 Relative Humidity Shock Electronics housing IEC 68-2-27 Fiber cable/ Optical head Storage Temperature Electronics housing -20 to 70 °C (-4 to 158 °F) 38 (1.5) Minimum Bend Radius Ambient Temperature Electronics housing 0 to 60 °C (32 to 140 °F) with water cooling 0 to 150 °C (32 to 302 °F) 2 liter (0.5 gal) per minute 16 ºC (62 ºF) Process Instruments Weight Electronics housing 0.71 kg (25 oz) Optical head 0.10 kg (3 oz) * Note: RS485 4 wire only available whe

Open the catalog to page 1

User Interface Temperature Display Raise Value Browse Button ! CAUTION ! LASER LIGHT Sensor Status (green) Lower Value DO NOT STARE INTO BEAM 1mW at 650nm CLASS II LASER PRODUCT Sensor Attribute Temperature Range and Optical Resolution (see table below for minimum spot sizes) 1.0 µm nominal one/two color 1.6 µm nominal one/two color 1.0 µm nominal single color (All lenses fixed focus) Signal Processing Lens Options 1.6 µm nominal single color ±(0.3% Tmeas. +2°C) with no attenuation Laser Optional Temperature Resolution Response Time Spectral Response Peak Hold, Decay Rate, Averaging

Open the catalog to page 2

Process Instruments Accessories Additional accessories are available as shown below (refer to the Endurance Accessory datasheet). • Adjustable bracket (E-FOMB) • Switching power supply 24 VDC 1.3 A industrial power supply, DIN rail mount (E-SYSPS) • Air purge collar and stainless steel sighting tube, 150mm (6in.) long, 25mm (1in.) diameter. (E-FOHAPA) • Switching power supply in NEMA-4 enclosure 100 / 240 VAC 24 VDC, 1.1 A (E-PS) • Rooftop Mounting/Purging available with flange or gravity-held base (E-FORFMC) and quick-release fitting for optical head, sapphire window, stainless steel...

Open the catalog to page 3