Catalogs >
Fluke Process Instruments >
DATAPAQ TP3 High Accuracy Data Logger – 10 and 20 Channels

DATAPAQ TP3 High Accuracy Data Logger – 10 and 20 Channels
2Pages

Catalog excerpts

DATAPAQ TP3 High Accuracy Data Logger – 10 and 20 Channels - 1

DATAPAQ TP3 High Accuracy Data Logger – 10 and 20 Channels for Furnace Tracker , Kiln Tracker and Oven Tracker ® Made from a single piece of machined stainless steel, with Bluetooth® communication as standard and multiple 10 or 20 channel thermocouple types, the Datapaq TP3 is the toughest and smartest data logger available! The data logger can be fuelled by three battery types housed in an interchangeable battery cassette for maximum flexibility. With 3.6 million data points for clearer process visibility, sampling speed of 10 readings per second and accuracy of ±0.3 °C (0.5 °F), the Datapaq TP3 is the obvious choice for heat treatment, TUS surveys, ceramics and automotive processes. Optional RF telemetry for real time monitoring, analogue inputs for reading other variables and choice of two logger styles allow the DATAPAQ TP3 to meet the most demanding specifications in the industry. System Value DATAPAQ TP3 data logger DATAPAQ TP3 Furnace system Ten or twenty thermocouple channels for maximum data collection on each run Reset/download via Bluetooth with short range telemetry capability (up to 5 meters) High logger accuracy: ±0.3 ºC (±0.5 ºF) for compliance with tight specifications On-board memory service log for remote diagnostic and rapid on-site service Standard USB data cable available in local markets Radio frequency (RF) telemetry or hard wired data acquisition for monitoring in real time 3 user-replaceable battery types for operation in normal and high ambient temperatures ‘Multiple events’ allows variable sampling intervals during a run – ideal for water and gas quench processes Multiple run capability allows storing up to 10 runs before downloading into separate paqfiles Sampling intervals down to 0.1 seconds to collect maximum data AMS 2750E and CQI-9 REQUIREMENTS Multiple thermocouple types give flexibility for TUS and SAT On-board correction factors and calibration certificate – eliminate human error and save time on report generation Multiple software language support – ‘one click’, live language selection to meet operator needs Analogue input as optional for measuring 4 – 20 mA and 0 – 10 V signals Eliminate earth loop noise by using Bluetooth (as standard) instead of a cable for external logging

Open the catalog to page 1

DATAPAQ TP3 High Accuracy Data Logger – 10 and 20 Channels - 2

TECHNICAL SPECIFICATIONS Data Logger Model number Temperature range Connectivity Max. operating temperature Number of channels Memory capacity Sampling interval Logger accuracy Dimensions L×W×H Battery Thermocouple type TP3126 TP3026 TP3226 TP3136 TP3036 TP3236 −100 °C to 1370 °C (−148 °F to 2498 °F) USB or Bluetooth* as standard 110 °C 70 °C (158 °F) 110 °C 70 °C (158 °F) 110 °C 70 °C (158 °F) (230 °F) (230 °F) (230 °F) 10 20 3.2 million data points** 3.6 million data points** 0.1 sec – 50 min no telemetry ; 1 sec – 50 min RF telemetry* ± 0.3 °C (0.5 °F) 200 × 98 × 20 mm (7.9 × 3.9 ×...

Open the catalog to page 2