5320A Multifunction Electrical Tester Calibrator
7Pages

2 Verify and calibrate electrical test tools with a single instrument 5320A Multifunction Electrical Tester Calibrator

Test instruments that verify the safety of electrical installations, appliances, and other electrical/electronic devices are becoming more common, thanks in part to regulatory standards. For example, installation and portable appliance testing regulations such as EN 61557 (16th Edition) in the United Kingdom, and VDE 0100/0700 in Germany are designed to protect users from hazards such as electrocution and fire. Safety standards such as CCC in China, CE in Europe, UL and CSA in North America, drive regulatory testing for new electrical and electronic products, by using electrical safety...

4 Multifunction installation testers The 5320A has all the functionality needed to calibrate installation testers with insulation resistance, continuity, loop, RCD and earth resistance test capabilities. Portable appliance testers (PATs) The 5320A has all the functionality needed to calibrate PATs, with insulation resistance, ground bond, leakage current, flash voltage and load test capabilities. Continuity testers and earth (ground) resistance testers To calibrate these low ohms testers, a calibrator must be able to source precision low ohms. From its low ohms precision resistors, the...

This versatile calibrator is also remarkably easy to use. Making measurements is as easy as 1-2-3 3 2 1 Select a function at the press of a button. Functions are clearly organized into Outputs (HI Ohms, LO Ohms, Leakage Current and Voltage Source), discrete high current resistors (for loop/line impedance, ground bond and RCD/GFCI) and the meter (ac/dc voltage and current). Enter values. A calculator-style keypad makes it easy to enter values. You can also use the edit knob to vary the values entered. Connect the unit under test. Not sure of how to connect the UUT properly? The active...

Automate the 5320A calibrator with MET/CAL® Plus Calibration Management Software MET/CAL Plus software automates the calibration process, helping you to increase throughput and ensuring that calibrations are done consistently every time. This powerful software application documents calibration procedures, processes, and results, for greater ease in complying with ISO 17025 and similar quality standards. MET/TRACK® software, a dedicated system to manage your test and measurement assets, is incorporated into the MET/CAL Plus application. MET/TRACK software supports the traceability and...

10 11 Measurement functions Voltmeter Range of input voltage: 0 to 1000 V RMS (ac or dc) Resolution: 4½ digits Frequency range: DC, 20 Hz to 2 kHz Reading/second: 2 Range Uncertainty (% of reading + mV) Resolution 10 V 0.15 % + 5 1 mV 100 V 0.20 % + 50 10 mV 1100 V 0.20 % + 550 100 mV Ammeter Range of input current: 0 to 30 A RMS Resolution: 4½ digits Frequency range: DC, 20 to 400 Hz Reading/second: 2 Range Uncertainty (% of reading + mA) Resolution 300 mA 0.15 % + 0.15 0.1 mA 3 A 0.15 % + 1.5 1 mA 30 A 0.30 % + 15 10 mA VA measurement Total range: 0 to 33 kVA Resolution: 1 VA 10 kV...

Fluke Corporation PO Box 9090, Everett, WA USA 98206 Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com ©2006 Fluke Corporation. All rights reserved. Specifications subject to change without notice. Printed in U.S.A. 11/2006 2644059 B-EN-N Rev B Pub_ID: 11120-eng rev 02 Fluke. Keeping...