COMPASS MAG DRIVEN PUMPS

COMPASS The separation of liquid chamber/atmosphere by means of an isolation shell is the best solution to pump aggressive chemical, high purity liquids and liquids difficult to seal. Hermetic seal-less injection moulded thermoplastic pumps are the best solution for light duty applications. Mag drive centrifugal pumps series COMPASS are made of Polypropylene and PVDF, and are suitable for high corrosive liquids. Thanks to the innovative mag drive system, COMPASS series reduce the risks of leakage and emissions and the maintenance costs. The transmission of the motion occurs through magnetic joints...

CM004 TECHNICAL DATA Inlet connections 1” f

PP TECHNICAL DATA Inlet connections 1” f SPECIFIC GRAVITY TABLE IMPELLER 0,25 KW 0 81 mm up to 1,2

CM010 TECHNICAL DATA Inlet connections 1” 1/2 f Outlet connections 1” m tttl PmTtrlT The curves and performance values refer to pumps with free delivery outlet with water at 20 °C, and two poles motor 50 Hz SPECIFIC GRAVITY TABLE MOTOR SPECIFICATION SIZE Kw RPM

TECHNICAL DATA Inlet connections Outlet connections Max. Flow rate Max. Delivery head Max Viscosity Max Temperature PP Min. Temperature PP Max Temperature PVDF Min. Temperature PVDF SPECIFIC GRAVITY TABLEIMPELLER 1,5 KW 0 123 mm up to 1,1 P = PP D = EPDM K = PVDF V = VITON

PP PVDF TECHNICAL DATA Inlet connections 2” f SPECIFIC GRAVITY TABLE MOTOR SPECIFICATION SIZE Kw RPM

FLUIMAC S.r.l. Via Ticino 2 / 4 21043, Castiglione Olona (VA) - Italy Tel.:+39 0331 866688 Fax:+39 0331 864870 www.fluimac.com [email protected]