PROCESS ANALYTIC » VISCOSITY » TRANSMITTER MARIMEX® ViscoScope® D250/4450 Transmitter Transmitter for process viscometer Display Unit 9 Compatible with all ViscoScope® sensors Condition monitoring 9 Panel or field mounting 9 Process documentation via 4-20 mA / fieldbus 9 Local display (4-line display) 9 Div. calculable parameters Technical data Operating conditions Properties Display Measurement parameters RS232 output on the front, MODBUS RTU (standard) Viscosity, Process Temperature, Coil Temperature, External Input, Resonance Frequency Calculable parameters Temperature compensation, Dynamic viscosity, Kinematic viscosity, User viscosity Ambient temperature 0/4...20 mA or 0/2...10 VDC (active) RS232 or RS485 / 2 SPDT relays RS232 or RS485 (note type code) 4450: 4 D250: 2 External input Transmitter operation Moving average (up to 200 measured values) System function, sensor diagnosis, coil temperature, 2 adjustable LEDs Power supply Sensor + Control GmbH & Co. KG The ViscoScope® transmitters of the VS-4450 and VS-D250 series are compatible with all ViscoScope® sensors of the types VA-300 and VA-100 and their predecessor models. The transmitter excites the sensor and keeps the amplitude of the sensor‘s resonance frequency constant with fast PID control. The internal resolution is 16 bits, so that viscosity ranges over 4 decades are also excellently covered. Both transmitters are equipped with a configurable display. The transmission of the measurement data is done via analogue or serial interfaces in industry standard. The model VS-4450 is also available with 2 SPDT relays, which allow time-proportional control or alarms. Installation and assembly The transmitter VS-4450 is designed in 19“ standard and can therefore be installed in all suitable housings. The model VSD250 is designed for mounting on a DIN rail. With an adapter, wall mounting as well as installation in a wall or Ex-d enclosure is possible. Sales & Consulting Phone-volume Phone: +49-6251-8462-0 At Email: [email protected] General description Output card socket

PROCESS ANALYTIC » VISCOSITY » TRANSMITTER ViscoScope® D250/4450 Dimensional Drawing model code Basic designation Outputs (2 output card sockets) 1 = 1x 0/4...20 mA or 1x 0/2...10V DC (active) 2 = 2x 0/4...20 mA or 1x 0/2...10V DC (active) RTU = 1x RS485 (Modbus RTU) 1RTU = 1x 0/2...10V DC (active) or 1x 0/4...20 mA and 1x RS485 (Modbus RTU) Power supply 24D:= 24V DC ViscoScope VS-D250 Housing DG = DIN rail housing, IP42 ExG: = Ex d enclosure Basic designation Outputs (4 output card sockets) 1 = 1x 0/4...20 mA or 1x 0/2...10V DC (active) 2 = 2x 0/4...20 mA or 1x 0/2...10V DC (active) 3 = 3x 0/4...20...