*mydirectindustry

CO₂ Sensor ZMF-100-IR

Product catalog summary

Overview: The CO₂ Sensor ZMF-100-IR is designed for industrial applications, capable of measuring CO₂ concentrations up to 50,000 ppm. It offers excellent long-term stability, robustness, and a favorable price/performance ratio. The sensor is maintenance-free due to its NDIR technology and is minimally affected by external factors like air pressure fluctuations and vibrations.

Technical Specifications:

Measuring Principle: Optical, NDIR (non-dispersive infrared absorption measurement)
Signal Output: 4...20mA or 0...10V
Operating Voltage: 24V DC/100mA
Housing: Aluminum, IP54, red colored
Dimensions: 90x85x65mm
Weight: 500g

Operating Conditions:

Temperature: Operating: -10...+50°C, Storage: -40°C...+100°C
Relative Humidity: 15...95%, non-condensing
Air Pressure: 900...1100 hPa

Sensor Features:

Heating-up Time: Approximately 5 minutes
Reaction Time: Approximately 30 seconds
Accuracy: +/- 2%
Reproducibility: +/- 1%

Measuring Ranges: The sensor can measure CO₂ concentrations in various ranges: 0...3,000 ppm, 0...5,000 ppm, 0...6,000 ppm, 0...10,000 ppm, 0...20,000 ppm, 0...30,000 ppm, and 0...50,000 ppm.

Approval: The device complies with EN 61000-6-2, EN 61000-6-4, and EMC Directive 2014/30/EU.

Housing and Electronics: The sensor comes with mounting and operating instructions. It features a screw terminal for connection with a shielded cable (3x1.5mm² Cu) and a maximum load of 450 OHM for 4-20 mA output. Other electric connectors and cable glands are available upon request.

Catalog excerpts

CO₂ Sensor ZMF-100-IR Robust CO2 sensor for industrial applica ons up to 50.000ppm  Excellent long-term stability and robustness  attractive price / performance ratio  Maintenance-free with NDIR technology  Hardly affected by external influences, such as air pressure fluctuations and vibrations  4 ... 20mA or 0 ... 10V signal output Measuring ranges measuring principle signal output housing and protec on marking storage temperature Sensor features hea ng-up me Approval The device is conform to the following norms EN 61000-6-2  EN 61000-6-4  EMC Directive 2014/30/EU  *1NDIR: non-dispersive infrared absorp on measurement technical changes reserved Vertrieb und Beratung: ZILA GmbH E-Mail: info@zila

Open the catalog to page 1

CO₂ Sensor ZMF-100-IR Housing and electronics Connection shielded cable with 3x1,5mm² Cu + maximum load 450 OHM (4-20 mA) selected measuring range as speciﬁed moun ng and opera ng instruc ons other electric connectors on request 4...20mA or 0...10V signal output other cable glands on request technical changes reserved Vertrieb und Beratung: ZILA GmbH E-Mail: [email protected] 98527 Suhl

Open the catalog to page 2

All Fluid.iO Sensor + Control GmbH & Co. KG catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list