JH2
16Pages

JH2 SINGLE AXIS HYDRAULIC JOYSTICKS 20.03

SINGLE AXIS PILOT VALVE JH2 Index: Description and technical features: Internal hydraulic circuits: Connection hydraulic circuits: Metering curves: Overall dimensions: Rubber boot: Control handle: Model coding:

SINGLE AXIS PILOT VALVE JH2 Description: Hydraulic single axis pilot valve JH2 are proportional remote control operating by the principle of the direct action reducer valves. They can work up to 100 bar supply pressure and a maximum 60 bar control pressure, flow range from 5 to 15 l/min and they are suitable for the remote control of main valves, proportional valves, servo controls for the adjustment of hydraulic pump and motor variable displacement, hydraulic clutches and brakes. The consumed energy is extremely low, very little maintenance is needed, the anti-oscillation system of the...

SINGLE AXIS PILOT VALVE JH2 Internal hydraulic circuits: Single axis pilot valve JH2/1 1 Two section single axis pilot valve JH2/2 2 Three section single axis pilot valve JH2/3 2

SINGLE AXIS PILOT VALVE JH2 Connection hydraulic circuits: Supply from auxiliary pump Main circuit Main pump Auxiliary pump Supply from pressure reducer valve Main circuit Supply unit Main pump

SINGLE AXIS PILOT VALVE JH2 Metering curves: Diagram and metering curve specification type A METERING CURVE CODE METERING CURVE CODE METERING CURVE CODE

SINGLE AXIS PILOT VALVE JH2 Metering curves: Diagram and metering curve specification type B METERING CURVE CODE METERING CURVE CODE METERING CURVE CODE

SINGLE AXIS PILOT VALVE JH2 Metering curves: METERING CURVE CODE Diagram and metering curve specification type C METERING CURVE CODE Diagram and metering curve specification type D

SINGLE AXIS PILOT VALVE JH2 Overall dimension: Sectional single axis remote control with standard knob 39 (*)

SINGLE AXIS PILOT VALVE JH2 Overall dimensions: Single axis pilot valve with standard knob

SINGLE AXIS PILOT VALVE JH2 Overall dimensions: Single axis pilot valve with straight handle IC2 Ø38

SINGLE AXIS PILOT VALVE JH2 Overall dimensions: Single axis pilot valve with multifunctional ergonomic handle IE2 63

SINGLE AXIS PILOT VALVE JH2 Rubber boot protection: Without rubber boot With rectangular rubber boot For handle IE2 For all other handle option

SINGLE AXIS PILOT VALVE JH2 Handle options: For a detailed configuration of the handle, please refer to the technical catalogue of the required model. Without handle Knob (available for sectional version with MAX Diam <38 mm) Standard conical knob with lens Multifunction ergonomic (not available for modular version) Standard straight (not available for modular version) Multifunctional straight (not available for modular version)

SINGLE AXIS PILOT VALVE JH2 Model coding: JH2/ - IE20001 = Handle coding, assigned by Fluidea (for available options please refer to handle technical catalogue) - S = Conical knob with lens (standard version) - Z = without handle Rubber boot (page 13): - Z = Without rubber boot - R = Standard rectangular rubber boot Ports: - B = 1/4” BSP ports - U = 9/16”-18 UNF ports Return spring: - A = Standard (Preload 29,5 N - End stroke load 44,0 N) - B = Light (Preload 14,6 N - End stroke load 29,4 N) - C = Medium (Peload 73,5 N - End stroke load 135,5 N) - D = Heavy (Preload 98,0 N - End stroke load...

THE COMPREHENSIVE RANGE OF MANUFACTURED AND MARKETED COMPONENTS INCLUDES: - Hydraulic gear and axial piston pumps & motors - Directional control valves & selector valves - Proportional EH pressure reducing valves & manifold blocks - Hydraulic, pneumatic and electric on-off & proportional joysticks - Control electronics - Radio controls, push buttons stations, dashboards and armrests - Multifunction ergonomic, cylindrical & palm grips - Hydraulic filters & contamination control systems - Heath exchangers and cooling systems - Fluid monitoring & diagnostic instruments - Bell housings, driving...