IE2
18Pages

Multi-function ergonomic grip IE2

MULTIFUNCTION ERGONOMIC GRIPS IE2 Index: Description: Technical features: Overall dimensions: Standard push-buttons position, type and colour: Other push-buttons, rockers, proportional rollers and led: Mounting adapters: Wirimg configuration: Rubber boots: Ergonomic grip IE2 with coloured front plate, 5 on-off momentary push-buttons, 3 with raise cap actuator 2 with flush cap actuator

MULTIFUNCTION ERGONOMIC GRIP IE2 Description: Multifunction ergonomic grip’ series IE2 can be supplied as individual units spare or mounted on our electrical and hydraulic joysticks. For its ergonomic design and for all the possible configuration mix of push-buttons, rockers, proportional rollers and other safety and signalling devices, the operator can manage in an easy, precise and intuitive way, using just one hand, multiple working functions simultaneously or in sequence, with minimum effort and maximum safety for people and properties. In fact, the operator can focus his attention on...

MULTIFUNCTION ERGONOMIC GRIP IE2 Technical features: Handle: - Shell material: - UV resistance: - Mineral oil resistance: - Protection degree: - Ambient temperature range: - Adapter material: Techno polymer PPO Good Good IP54 from -20° to + 60°C Zinc plated steel or brass Standard pushbutton (off-on type A and B): - Maximum current: - Input voltage range: - Electrical life: - Mechanical life: - Protection degree: - Ambient temperature range: - Total operating stroke: - Operating force: - Terminal materials: 5 A resistive, 3 A inductive from 5 to 28 VDC from 25.000 cycles at max. current to...

MULTIFUNCTION ERGONOMIC GRIP IE2 Overall dimensions Handle IE2 without rubber boot Handle IE2 with rubber boot type Q

Standard push-button positions For the combined position of push-button, rocker switch, proportional roller, 4-way push-buttons, led and other devices, please contact our sales office. Front view Safety trigger UP and push-button in position 18 are not compatible together Bottom view

MULTIFUNCTION ERGONOMIC GRIP IE2 Front plate colour range Black (standard) Standard push-buttons colour range The colours are valid for the N.O. momentary standard push-buttons, with raised cap (A) or flush (B) and without signalling led

MULTIFUNCTION ERGONOMIC GRIP IE2 Push-buttons, rocker and lever switches For the colour choice of the serviceable push-button caps type B (flush) and A (raised) of the first row see table at page 7 “OFF-MOM” Flush green “OFF-MOM” Raised violet “OFF-MOM” Flush yellow with led “OFF-MOM” Raised red with led “OFF-ON” latching green without led “OFF-ON” latching green with led “MOM-OFF-MOM” 3 latching positions “OFF-ON” 2 latching positions “OFF-ON” 2 momentary positions “START-STOP” Yellow latching Momentary rocker switch “MOM-OFF-MOM” Latching rocker switch “ON-OFF-ON” Latching diverter...

MULTIFUNCTION ERGONOMIC GRIP IE2 Rocker diverters, 4-way push-buttons and proportional rollers Latching diverter “ON-OFF-ON” Momentary diverter “MOM-OFF-MOM” Black safety guard for diverter Red safety guard for diverter Latching diverter “ON-OFF-ON”+ led Safety trigger Knob potentiometer Linear Hall effect proportional pushbutton Hall effect proportional button 4-way Hall effect potentiometer Return spring proportional roller Yellow return spring proportional roller Grey return spring proportional roller Blue return spring proportional roller Proportional roller with PWM integrate

MULTIFUNCTION ERGONOMIC GRIP IE2 High brightness signalling leds Wired and loosen push-buttons are available on reques

MULTIFUNCTION ERGONOMIC GRIP IE2 Mounting adapters Standard straight adapter M12-M Straight short adapter M10-F Straight short adapter M12-F Straight long adapter M10-F

MULTIFUNCTION ERGONOMIC GRIP IE2 Mounting adapter Spherical joint with knurled nut for tilt angle adjustment The spherical joint type GS, shown on the side, allows to adjust the handle tilt angle from 0° up to 20° in any direction by stopping it with the knurled nut in the desired position.

ERGONOMIC HANDLES IE2 Mounting adapter IE2 ergo grip with adapter type OR assembled with 2 items to swivel the handle avoiding the rotation of the handle wires. The typical application is the direct mounting on the lever of hydraulic main valve. Bottom cover without adapter, with wiring for remote control IE2 ergonomic grip with 4 momentary push-buttons with safety trigger, bottom cover type CR and wiring and circular connector, used for the remote control of a rescue pulley. 13

MULTIFUNCTION ERGONOMIC GRIP IE2 Handle with bottom cover type BM, straight with magnetic plate. Mounting adapter There are two holes for wire exit, lighter plug or connector for service vehicles, for control, with multicore cable and customized connector on request. A typical application is the wire remote control of on-off or proportional functions of agricultural machines, air spray, brush cutter and machines for the maintenance of orchards and vineyard. The handle is fixed in the desired position in the tractor to suit the various tools in the machine. IE2 ergonomic grip with 8...

MULTIFUNCTION ERGONOMIC GRIP IE2 Wiring configuration Without wires Single high flexibility , section 0,50 mm2 Multicore cable, section 0,50 mm2 Special wire on request (specify features) Wire length Without wires Standard length, from handle bottom (cm) Length on request, from handle bottom (cm) Wire terminals Without wires Wire terminal with 5 mm strip, without tinplate With faston (specify brand and type) Connector (specify brand and type) with wired terminals Customized wiring with connectors are available on request

MULTIFUNCTION ERGONOMIC GRIP IE2 Rubber boot: With square boot With rubber boot and flanged mounting kit Bottom view

MULTIFUNCTION ERGONOMIC GRIP IE2 Ordering key: IE2 N BG1 BY2 AR3 AB4 UP DF Q Rubber boot (page 16) (Omit if not required) - with square rubber boot = Q - with rubber boot and flanged mounting kit = F Wire terminals (page 15): - without wires = Z - wire terminal with 5 mm strip, without tinplate = N - with faston (specify brand and type) = S - Connector (specify brand and type) with wired terminals = C Cable length, in cm (page 15): - without wires = 00 - standard length, from handle bottom (cm) = 50 - length on request, from handle bottom (cm) = XX Wire configuration (page 15): - without...