TsFR 400
1 / 2Pages

Catalog excerpts

TsFR 400 - 1

Magnet drive rotary vane pump-motor unit TSFR 400 The TMFR series and its innovative concept of a completely integrated unit evolves into a larger flow rate unit: the TSFR unit. Especially designed for those applications where many hours of operation are required, the TSFR is designed to handle up to 1000 l/h on a continuous duty base. The electro-magnetic drive grants absence of friction and high efficiency. The evolution of the electronic controller into an intelligent unit, allows the option of a continuous ramp speed control between 1100 and 3500 rpm where the speed of acceleration may be precisely varied. External feedback loop allows to choose a constant pressure or flow rate values independently from the variations of the hydraulic conditions. The versatility of this product opens new horizons to high technology systems. The housing and the rotor are in AISI 303 stainless steel, while the pumping chamber is in carbon graphite. Elastomers are available in NBR, Viton® or EPDM. MAIN APPLICATIONS • Post mix • Solar heating • Circuit washing TECHNICAL INFORMATION Pump housing material Pumping chamber Ports Max static pressure Noise Unit weight (w/o controller*) Stainless steel Carbon graphite 3/8” GAS or NPT 20 bar/290 psi 49dB (A) at 1100 rpm 2.8 kg (6.2 Lb) Max. operative temperature Motor type Speed range Absorbed power Actual power Motor IP protection TO CONTROLLER CARD BY CONNECTION CABLE

Open the catalog to page 1
TsFR 400 - 2

Magnet drive rotary vane pump-motor unit TSFR 400 TSFRSS (STAINLESS STEEL) Relief valve Flow rate Note: Hydraulic performances measured with 20 °C (68 F) water and without bypass. Curves are averages. For applications involving other fluids, high temperatures, unusual processing conditions or speed higher than 2500 rpm consult the factory or an authorized Fluid-o-Tech distributor. Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Fluid-o-Tech srl Fluid-o-Tech Int'l Inc. Fluid-o-Tech Int'l Inc. Japan Fluid-o-Tech...

Open the catalog to page 2

All Fluid-o-Tech s.r.l. catalogs and technical brochures

  1. SERIE FPP

    1 Pages

  2. SERIE MONO

    2 Pages

  3. DGM SERIES

    2 Pages

  4. PG300 SERIES

    4 Pages

  5. DGD series

    2 Pages

  6. FG100 series

    2 Pages