Solenoid pumps Mono series Find out more This latest version of the Fluid-o-Tech® Mono solenoid pump has been developed looking at the future. The hydraulic improvements make of this pump the ideal component for all the applications where safety and reliability are necessary elements. The Mono solenoid pump, designed for pumping a range of fluids including potable water, food quality low viscous syrups and semiaggressive fluids at relatively high pressures, is available in brass or plastic housing and fittings, with glass or EPDM check valves and an AISI 430 FR stainless steel piston. The coil is made of self-extinguishing material with a class H insulation winding. All the models are equipped with a noise suppression device which allows the pump to be installed in all those applications where low noise is a premium. Shock absorbing supports are also available for the quietest operation. MAIN APPLICATIONS • Espresso coffee machines • Carpet cleaners • Beverage vending machines • Water purifiers • Smoke generators • Water carbonators • Steam generators • Spraying systems ELECTRICAL CHARACTERISTICS Voltage Frequency Power Current Voltage Frequency Power Current consumption at 50 Hz Current consumption at 60 Hz Voltage Frequency Power Current Approval PUMP COIL AC POWER SOURCE ONLY Diode wiring diagram to follow when the pump is supplied without plug

Solenoid pumps Mono series Flow rate Flow rate Flow rate Note: Characteristics with water at 20 °C (68 F). Pump weight: 660 g (1,4 Lb). Figures of flow are averages. Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Via Leonardo da Vinci, 40 20094 Corsico, Milano, Italy Tel. +39 02 9995 01 Fax +39 02 9995 0999 [email protected] Fluid-o-Tech Int’l Inc. 161 Atwater St., 06479 Plantsville CT (USA) Tel. +1 (860) 276 9270 Fax +1 (860) 620 0193 [email protected] Fluid-o-Tech Asia